Fiberroad Technology Co., Limited |
|
Rack Mount 40CH Athermal AWG DWDM Transceiver , 100GHz AAWG module
AAWG(Athermal Arrayed Waveguide Grating) module is based on the silica on silicon technology and no electrical power is required. The specifications serve for C-band AWG Flattop MUX/DEMUX in DWDM system.
Key Features
Specifications
Parameters | Notes | Specifications | Units | |
Min | Max | |||
Channels |
| 40 | Ch | |
Channel Spacing |
| 100 | GHz | |
Reference Pass-band | Relative to ITU Grid | ± 0.1 | nm | |
ITU Frequency | On ITU grid in C-band | 195.90 | 192.00 | THz |
ITU Wavelength | On ITU grid in C-band | 1530.334 | 1561.419 | nm |
Center Frequency Accuracy | Maximum of the absolute deviation of the 3 dB center wavelength from ITU grid over all channels | -0.05 | +0.05 | nm |
Insertion Loss | Maximum of the insertion loss across the ITU pass-band over all channels |
| 6.0 | dB |
Insertion Loss Uniformity | Maximum insertion loss variance across all channels |
| 1.0 | dB |
Ripple | Maximum of the loss variance across the ITU pass-band over all channels |
| 0.75 | dB |
1dB Bandwidth | 1dB from min Insertion Loss, full width, average polarization | 0.36 |
| nm |
3dB Bandwidth | 3 dB from min Insertion Loss, full width, average polarization | 0.51 |
| nm |
Adjacent Channel Isolation | Ratio of peak transmission to the maximum transmission over both adjacent pass-bands | 25 |
| dB |
Non-Adjacent Channel Isolation | Ratio of peak transmission in channel pass-bands to maximum transmission over all non-adjacent pass-bands | 30 |
| dB |
Total Crosstalk | Ratio of power in channel to power in all other pass-bands | 21 |
| dB |
Polarization Dependent Loss | Maximum ratio of transmissions over all polarization states, over the ITU pass-band |
| 0.5 | dB |
Return Loss |
| 40 |
| dB |
Polarization Mode Delay (PMD) | In Reference Passband over all channels |
| 0.5 | ps |
Chromatic Dispersion | In Reference Passband over all channels | -20 | 20 | ps/nm |
Order Information
P/N | Description | x | x | X(Channel Spacing) |
FR-6000S-TAWGxx-x | Hot-type AWG | 32=32CH 40=40CH 48=48CH | S:unidirectional (single fiber Bidirectional) (Nil):two-fiber unidirectional | 25G 50G: 100G |
FR-6000S-AAWGxx-x | Athermal AWG |