W25Q16JVSSIG 16Mbit Serial Flash Memory Dual Quad SPI FLASH SOIC-8
GENERAL DESCRIPTIONS
The W25Q16JV (16M-bit) Serial Flash memory provides a storage
solution for systems with limited space, pins and power.
The 25Q series offers flexibility and performance well beyond
ordinary Serial Flash devices. They are ideal for code shadowing to
RAM, executing code directly from Dual/Quad SPI (XIP) and storing
voice, text and data.
The device operates on a single 2.7V to 3.6V power supply with
current consumption as low as 1µA for power-down.
The W25Q16JV array is organized into 8,192 programmable pages of
256-bytes each. Up to 256 bytes can be programmed at a time. Pages
can be erased in groups of 16 (4KB sector erase), groups of 128
(32KB block erase), groups of 256 (64KB block erase) or the entire
chip (chip erase).
The W25Q16JV has 512 erasable sectors and 32 erasable blocks
respectively. The small 4KB sectors allow for greater flexibility
in applications that require data and parameter storage.
The W25Q16JV supports the standard Serial Peripheral Interface
(SPI), and a high performance Dual/Quad output as well as Dual/Quad
I/O SPI: Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1
(DO), I/O2, and I/O3. SPI clock frequencies of up to 133MHz are
supported allowing equivalent clock rates of 266MHz (133MHz x 2)
for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the
Fast Read Dual/Quad I/O instructions. These transfer rates can
outperform standard Asynchronous 8 and 16-bit Parallel Flash
memories. Additionally, the device supports JEDEC standard
manufacturer and device ID and SFDP Register, a 64- bit Unique
Serial Number and three 256-bytes Security Registers
FEATURES
New Family of SpiFlash Memories
– W25Q16JV: 16M-bit / 2M-byte (2,097,152)
– Standard SPI: CLK, /CS, DI, DO
– Dual SPI: CLK, /CS, IO0, IO1
– Quad SPI: CLK, /CS, IO0, IO1, IO2, IO3
Highest Performance Serial Flash
– 133MHz Single, Dual/Quad SPI clocks
– 266/532MHz equivalent Dual/Quad SPI
– 66MB/S continuous data transfer rate
– Min. 100K Program-Erase cycles per sector
– More than 20-year data retention
Efficient “Continuous Read”
– Continuous Read with 8/16/32/64-Byte Wrap
– As few as 8 clocks to address memory
– Allows true XIP (execute in place) operation
– Outperforms X16 Parallel Flash
Low Power, Wide Temperature Range
– Single 2.7V to 3.6V supply
– -40°C to +85°C operating range
– <1µA Power-down (typ.)
Flexible Architecture with 4KB sectors
– Uniform Sector/Block Erase (4K/32K/64K-Byte)
– Program 1 to 256 byte per programmable page
– Erase/Program Suspend & Resume
Advanced Security Features
– Software and Hardware Write-Protect
– Power Supply Lock-Down and
– Special OTP protection
– Top/Bottom, Complement array protection
– Individual Block/Sector array protection
– 64-Bit Unique ID for each device
– Discoverable Parameters (SFDP) Register
– 3X256-Bytes Security Registers with OTP locks
– Volatile & Non-volatile Status Register Bits
