1.Description of goods:
MA-Φ50 High Frequency Welded Pipe Mill for all kinds of pipes
deburring one welding line with stably working speed
2.Specification:
- Material to be processed: carbon steel, cold rolled, hot rolled
pre-slit strip coils.
- Steel Grade: 0.2% carbon
- Type of Products: Round Tubes, Square tubes, Rectangular tubes as
well as Hollow Sections
- Round Tube Outside Diameter: 15-63mm
- Square tubes: Min 10 x10 Max 50 x 50 mm
- Rectangular tubes: Min 10 x 15 Max 40x 60 mm
- Tube Thickness: Min 0.5 Max 3.25 mm
- Forming Line Speed: Max 100 m/min (Square and Rectangular tubes are
produced at lower speeds which depend on side to wall thickness
ratio)
- Tube Cut Length: Min 4 Max 12 meter
- Length Accuracy: ± 3mm
- Main Drive Motor: DC 55kW×2
- Line Composition:
- Double Mandrel Uncoiler
- Shear and TIG Welder
- Horizontal Strip Accumulator / Cage Accumulator
- Forming, Welding, Cooling and Sizing Section.
- Computer Flying Saw Cut-Off.
- Run-Out Roll Table, Inspection table Collectors.
- Solid State H.F. Induction Welder: 150 KW, Solid State (or
200KW,Vaccum Tube Type).
- Rolls: Rolls are manufactured in accordance with AISI D3 D2 or
E52100
- Electrical control cabinets
3.Technical parameter:
Model No. | MA114 | MA125 | MA165 | MA219 |
Outer diameter | Φ40~114 MM | Φ50~130 MM | Φ76~165 MM | Φ89~219 MM |
Wall thickness | 1.2~4.0 mm | 2.0~5.0 mm | 2.0~6.0 mm | 3.0~6.0 mm |
Production speed | 0~70 m/min. | 0~60 m/min. | 0~50 m/min. | 0~50 m/min. |
Driving motor power | 132 Kw*2 sets | 160 +200 Kw | 200 Kw*2 sets | 200 Kw*3 sets |
HF welder power | 300 KW | 400 KW | 500 KW | 500 KW |