|
[China]
Trade Verify
Address: Room 303 Jingrun Building No. 2017 Zhongshan Road, Jiaxing City, Zhejiang Province, China
Contact name:Wade.Qian
Jiaxing Seaman Marine Co.,Ltd. |
|
Verified Suppliers
|
|
|
EC/MED Approval LED Life Raft Light Ship’s Wheel Mark Liferaft
Indication Lights
Decription:
LED lithium battery liferaft lights is composed three parts of an
external lights, an internal lights, a battery main body. Internal
and external lights are respectively connected with the wire
connected to the battery main body, the battery supply power to the
internal and external lights. In the liferaft inflation process,
cell body on the plug was pulled out of the battery at the same
time, was launched, to supply the power for the internal and
external lights, lights and began to work outside. The external
lights can emit high luminance flicker signal, facilitate rescuers
found; the internal lights can emit enough light lighting for
reading chart or instructions within the raft.
The company production of LED lithium battery self-igniting light for lifebuoy, using the new LED light emitting diode and a special constant current flash circuit board, has the advantages of high reliability, long life, energy saving, environmental protection etc.
Product Standard
Compliance with SOLAS 74/96 Amendments; MSC.48(66). The International Life-saving Appliance (LSA) Code; MSC.(81)70 Revised Recommendation on Testing of Life-saving Appliances; MSC.218(82) Amendments to the International Life-saving Appliance Code; MSC.200 ( 80),MSC.226(82), MSC.323 ( 89 ) Amendments to the Revised Recommendation on Testing of Life-saving Appliances and ISO 24408.
Installation
1, The battery into the battery bonding column in Punta bag;
2, Showing the position lamps installed in the raft outside
the Punta column to the top;
3, Within a lighting installed in the raft or the vertical column
column Peng Fang
4, Pull the switch or the Department of the Peng-chu, and the life
raft floating tire rope at the bottom
of the appropriate column.
5, lithium battery shell particles of imported ABS material die
casting has good oil and anticorrosion,
rubber die casting lamp part is, there is a good waterproof
shockproof effect.
6, the power part of the adoption of good performance of the
lithium battery ER34615, can be -30 ℃
+65 ℃ environment in the normal discharge
7, The Ministry of imported lamp light-emitting LED chip, LED and
driver circuit board and the
regulator circuit board, so that can play a good battery
utilization, can extend the battery life and light
effects (light-emitting frequency of 50-70 times per minute)
Main Technical Specifications
No. | Performance | Parameter | No. | Performance | Parameter |
1 | Maximum dimension | 75×45×80mm | 7 | External lights luminous Intensity | ≥ 4.3 cd |
2 | Light source | LED | 8 | External lights flash frequency | 50-70 Flashes/ min |
3 | Power supply | battery | 9 | Lighting period | ≥ 12 h |
4 | Battery voltage | 3V | 10 | Working temperature | -1~+30°C |
5 | Chromaticity | White | 11 | Storage temperature | -30~+65°C |
6 | Internal lights luminous Intensity | ≥ 0.5 cd | 12 | Period of validity | 5 Years |
Feature:
