|
[China]
Trade Verify
Address: Room 303 Jingrun Building No. 2017 Zhongshan Road, Jiaxing City, Zhejiang Province, China
Contact name:Wade.Qian
Jiaxing Seaman Marine Co.,Ltd. |
|
Verified Suppliers
|
|
|
Inflatable Life Jackets TPU Oral Tube Overpressure Protection Relief Valve
Descripation:
Blow Mouth, TPU Material With Over Pressure Release Valve.
Heat Attached with the bladder(air chamber) of the inflatable life jacket, to inflate the bladder when loss air. to ensure the enough buoyancy.
1) Materials: TPU ( Thermoplastic Polyurethane )
2) Length: 19cm, Diameter: 1.6cm
3) Blow the chamber of inflatable life jacket with mouth tube.
4) Take off the dust cap and check that the valve seat is in working order with the reversed dust cap to remove the air out of the chamber; Close the cap properly again; Put the dust cap back in position.
Detail component in Re-arming Kits:
| Name | Qantity |
| Automatic device | 1 |
| Oral Tube | 1 |
| Brass Air valve | 1 |
| Water Activate Bobbin | 1 |
| Co2 Cylinder | 1 |
Storage condition:
it should be installed tightly on the life jackets
Reusable
Tips:
If you have any need and questions,pls feel to contact with me about the manual and automatic inflator device for inflatable life jacket/vest accessories
