|
[China]
Trade Verify
Address: Add: Building 13, MAX Technology Park, No. 151 Wangjiang Road, West Coast New District, Qingdao City, Shandong Province, China
Contact name:Michelle Zhang
Qingdao Florescence Marine Supply Co., LTD. |
|
Verified Suppliers
|
|
|
Pneumatic floating rubber fenders can play an important role in ships’ safe berthing operation. Essentially there are two main types of floating pneumatic rubbers, defined as either low or high pressure fenders. Pneumatic rubber fenders are made of synthetic-cord-reinforced rubber sheets with compressed air inside at initial pressure of 50kPa (low pressure) or 80kPa (high pressure) to enable it to float on water and work as a shock absorber between two ships or between ship and a dock. Although manufactured using different techniques, both low and high pressure fenders work by the same principle.
Yokohama Pneumatic fenders are used in the various applications including ship-to-ship operations, ports and terminals and have proven its quality and performance. With the needs of LNG continuing to develop, fenders play ever-greater role for the safe operations. Yokohama fenders are designed to withstand the extreme environmental conditions and we are committed to contribute to the offshore industry by delivering the superior products.
Several 4.5x9.0 size fenders will be used in between the largest floating production facility in the world and LNG carrier during the side-by-side operation.
If the yokohama type pneumatic fenders 3.3m x 6.5m caters to your requirement, welcome to buy or wholesale with our factory. As one of the leading manufacturers and suppliers in China, we will offer you the most competitive price and the best service.
The purpose of the pneumatic rubber fender
1.Ship to ship berthing
Accompanied by a large ship, the risk of two ship berthing at sea
is also increased, especially when the weather changes, accompanied
by wind and waves.Adopt pneumatic fender as side of the buffer, not
only make heavy berthing becomes easy, and improve the efficiency
of the transportation operations. Pneumatic fender is mainly used
for: Ice in the Antarctic ocean fishing ships, large oil tanker
berthing.
2. Used for terminal dock protection
Of the ship is very large, the cause of berthing impact energy have
multiplied.Inflatable rubber fender because of its high energy
absorption and low reaction force features are widely used.
| Feature | Application |
| 1.Easy to install and maintain | 1.Oil and gas tankers |
| 2.Low reaction and hull pressure | 2.Fast ferries and aluminium vessels |
| 3.More suitable for small and large tidal ranges | 3.LPG vessels, ocean platforms, large docks |
| 3.More suitable for small and large tidal ranges | 4.Harbors and wharf |
Net-type fenders are covered with a chain net, wire net or fiber net for fenders. Usually these nets have used-tires together with rubber sleeves for additional protection, except fiber net which has only rubber sleeves. Chain nets last longer against corrosion, while wire nets are light and more easily repaired.
Sling-type fenders have an attachment eye on each end for lifting and installation. Handling of sling type fenders is easy due to their lightweight.
500 mm * 1000 mm Yokohama pneumatic rubber fender for ship to ship or ship to shore was based on rubber technology for automotive tires and rubber aircraft fuel tanks. Our fenders are used in the various applications including ship-to-ship operations, ports and terminals and have proven its quality and performance. With the needs of LNG continuing to develop, fenders play ever-greater role for the safe operations. Yokohama type pneumatic rubber fenders are designed to withstand the extreme environmental conditions and we are committed to contribute to the offshore industry by delivering the superior products.
* Fully compliant with ISO 17357 standard ,manuifacture with mould ,difference with traditional hand-make products .
* Diameters ranging from 300 mm to 4500 mm and length ranging from 500 mm to 12000 mm
* Standard colors grey and black
* Constructed with an inner rubber layer,reinforcing cord layers and outer rubber layer
* Comprehensively tested for material and hydrostatic pressure irregularities .
* Correctly evaluated for angular and durability performance
* Clearly marked with all relevant identification
* Complete with up- to -date certification
* Available in a variety of sizes
* Thick outer skin supercedes that of a ormal surface fender
* Fitted safety valve for fenders of 2.5 m diameters upwards .
