Qingdao Florescence Marine Supply Co., LTD. |
Verified Suppliers
|
|
Floating Pneumatic Fender Inflatable Boat Fender 3.3m X 6.5m Yokohama Pneumatic Ship Fenders
Product name | Pneumatic fender |
Material | Natural rubber |
Size | Diameter:0.3-4.5m Effective length: 0.6-12m |
Application | STS / STD |
Certificate | CCS/BV |
Warranty period | 24 months |
Lifetime | 10 years(under normal using) |
Features Of Yokohama Pneumatic Fender
● High strength and friction resistance.
● High energy absorption with a low reaction force
● Adjusted performance by varying internal pressure
● Low and easy maintenance
● Low transportation costs – pneumatic fenders can be deflated and folded for transport
● Easily deflatable to be used in a different location and to be stored on deck
Manufacturing Certification: ISO 17357
ISO 17357:2002 specifies the material, performance and dimensions
of high-pressure floating pneumatic rubber fenders, which are
intended to be used for the berthing and mooring of a ship to
another ship or berthing structure. It also specifies the test and
inspection procedures for high-pressure floating pneumatic rubber
fenders.
ISO 17357:2002 does not address any safety hazards associated with
its use. It is the user’s responsibility to establish appropriate
safety and health practices and determine the applicability of
regulatory limitations before using this standard.
~For offshore cargo transfer between tankers, berthing, or mooring
between vessels
~Withstands impact and aggressive environments
~Heavy duty construction
~Sizes: Dia 300mm~4500mm / Length 1000mm~9000mm
It can easily be deflated which allows simple and cost-effective relocation and re-commissioning in other locations. Pneumatic rubber fenders have the merits of high-pressure resistance, high-energy absorption low reaction, aging resistance and saltwater corrosion resistance. They support berthing at angles up to 15 degrees for oil tankers, container vessels, bulwark carriers, yachts, ocean platforms, large wharf and naval ports, etc. We have two types of molded pneumatic fenders: pneumatic rubber fenders equipped with chain-tire-net wildly used for ship to ship transfer operations and hydro pneumatic fenders equipped with counterweight and ballast water designed for a submarine berth, which can be installed vertically. The ISO 17357:2014 compliant chain-tire net pneumatic fender (CTN) is a lattice of used tires connected by a network of horizontal and vertical chains, which adds further protection to the fender body. The chains are galvanized for greater corrosion resistance and covered by rubber sleeves to prevent abrasive damage to the outer rubber. The horizontal chains are fastened at each end to a ring shackle. The rubber fenders are supplied with two different inside pressure levels to cover a wide performance range, 50kPa & 80kPa,
Features Of Yokohama Pneumatic Fender
Fully ISO 17357-1:2014 compliant | Low reaction and hull pressure |
Maintains large clearances between hull and structure | Connects to smart technologies to digitize fender operations & performance |
Guaranteed energy absorption & reaction forces | Extended endurance life |