|
[China]
Trade Verify
Address: Room 405,Fudan Software Park,188 Changyi Road, Shanghai China.
Contact name:Eric Song
Shanghai Zhiyou Marine & Offshore Equipment Co.,Ltd. |
|
Verified Suppliers
|
|
|
Aluminum Brass Rubber Elements , Zine Plated Surface Treatment Hook-headed
Specification:
1.Hook device mainly as a vertical shaft sinking suspension bucket with ascension.
2.Hook device in two varieties, four specifications. Type I hook device points 5 t and 7 t, Ⅱ hook device points 9 t,11t.
3.Hook device structure is simple, usage the function is single. All parts by forging, steel wire rope connection adopted two kinds of type, including 5 t and 7 t with eccentric rope ring, the board connection; 9 t, 11 t the taper sleeve connection, lead antimony alloy casting by form.
Details for Hook-headed | ZHIYOU MARINE |
www.marineoutfittings.com |
Hook device adjustment and installation:
1. Hook device connected to the hoisting rope well qualified through inspection, must carry out a light load for a short period of time (30% ~ 60%) as the design load test run, commissioning time is recommended for eight hours or ascend 15 times. To check the cable connection parts and hook device each have other parts without exception.
2. Appearance inspection must be conducted before use, all rotating parts are in good lubrication, flexible rotation, the nut is loose, reliable insurance card.
3.Tightness of pin-type insurance card spring has been adjusted, move can make bolt clamping with the hand, not loose. Work to avoid collision, the deformation, can not use levers, hammer instead of manual move.
Features of Hook-headed | ZHIYOU MARINE |
www.marineoutfittings.com |
Hook device maintenance:
1.Hook device during the period of use, must appoint someone who's in charge of, regular check, found abnormal situations and make records, every three months or driving around 100 m regular inspection record at a time.
2.Users should be conducted on a regular basis hook device parts, the rotating parts for inspection. Found rust rotational parts is not flexible, should be timely lubrication.
3.Using hook hook mouth during wear < 6 mm advice from a spray welding repair or other effective surface treatment.
4.Hook hook mouth if a permanent residual deformation or abrasion quantity up to 8 mm, should be discarded and replaced.
5.One-way thrust ball bearing lubrication is grease lubrication, use half a year a lubricating oil should be replaced, such as stop using more than one year, before use to remove the cleaning in fat, again to ensure positive rotation.
6.The joint pin amounted to 3% of the original diameter, diameter of axle wear should be replaced.
7.Hook device sit idle, we should exist within the warehouse, no wind, sun, rain, rust, damage.
8.Spring force of bolt type insurance card failure, bolt, should be replaced immediately.
9.When the card cans, rope, overload, etc., should be disassemble parts, found a fracture, plastic deformation, should be replaced immediately. But the hook hook head position allows maximum residual deformation of 1 mm or less, otherwise, it should be replaced immediately, don't allow any residual deformation in the normal load.
After Sales Service For Marine Rubber Fender:
In marine environments, it is important to carry out scheduled
Inspections and Maintenance on fender systems and related equipment
to protect your investment and ensure safe, reliable and efficient
operation.
Neptune Marine Equipment Co.,Ltd can assist to inspect/Maintain for
your fender systems and repair procedures subsequently depending
on:
1. Local climate
2. System type and frequency of usage
3. Type and range of vessels using the berth
4. Local resources and equipment
5. Initial system design
Inspections/Maintenance of above items are focused on providing the
maximum life cycle for the fender system installed. Inspection
intervals should be adjusted to suit local conditions and feedback
from maintenance personnel.
Package & Delivery& Payment terms | ZHIYOU MARINE |
www.marineoutfittings.com |
Payment : By T/T(30% prepaid as depsit, the balance 70% against copy of B/L )
Package: Pallet with film packing or according to
customer's requirement
Delivery time : Within 20 to 30 days, According to customers's order
Shipment : 20'GP, 40'GP,40'HQ, 40'OT or in bulk
Our Service | ZHIYOU MARINE |
www.marineoutfittings.com |
We enthusiastically provide sincere and prompt service to our
customers and establish sustainable business relationship with
them. Zhiyou marine products are designed and manufactured with
one-stop solution providing ability. With 100% factory inspection,
we are responsible for any problems subjected to malfunction in
warranty period.
1) Punctual delivery time:
• We put your order into our tight production schedule, keep our
client informed about production process, ensure your punctual
delivery time.
• Shipping notice/ insurance to you as soon as your order is
shipped.
2) Services after sales:
• After receiving the goods, We accept your feedback at first time.
• We could provide installation guide and if you need, we could
give you global service.
• Our Sales are 24-hours online for your request,
3) Professional sales:
• We value every inquiry sent to us, ensure quick competitive
offer.
• We cooperate with customer to bid tenders. Provide all necessory
docuement.
• We have a sales team, with all techinical support from engineer
team.
High Quality Assurance | ZHIYOU MARINE |
www.marineoutfittings.com |
Product Range: We specialized in majority of marine equipments&
technique solution.
Product Design: With strong engineer team, for all marine products, we
support design, manufacture, install etc, according to your
requirements. All products strictly conform to your confirmation.
Product Process: Most of products are finished in our manufacture bases, thus
quality and delivery time could keep best and also avoid some
details mistake
Product Inspection: We support factory inspection and
inspection/certification.
Our Related Products | ZHIYOU MARINE |
www.marineoutfittings.com |
OUR PRODUCT RANGE
| 1 | Marine door | Watertight | Fireproof | Quick action | Weather tight | Airtight&Sound-reduction | Hydraulic Watertight | Hollow Cabin Door |
| 2 | Marine windows | Fixed | Skylight | Porthole | Sliding | Watertight | Fireproof | Louver& Cabin Shutters |
| 3 | Hatch cover& man hole | Sliding | Watertight Manhole Cover | Bolted watertight | Suez Canal Light | Quick action | Type A B C D | Rotating Oil tight |
| 4 | Mooring component | Marine bollards | Fairlead | Mooring roller | Mooring chock | |||
| 5 | Marine steel product | Seamless steel Pipe | Seam steel pipe | Marine crane | Marine Stern Roller | Marine fender rubber cylinder | Steel structure | API pipe |
| 6 | Marine propeller& shaft | Rudder System | propeller | Rudder shaft sealing component | Rudder blade | Rudder carrier bearing | Rudder stock/pintle sealing apparatus | Fin stabilizer |
| 7 | Marine deck equipment | Mooring winch | Crane | Windlass | Capstan | Rope Guider | Cable lifter | |
| 8 | Rubber elements | Rubber fenders | Pneumatic fender | Ship launching airbag | Rubber sealing strip | Quay fenders | Drain airbag | |
| 9 | Pressure vessel tank | Anti- Corrosion pressure | Fermentation tank | Low temperature pressure | Compressor air tank | Oil& LPG tank | Vacuum tank | Foam buffer tank |
| 10 | Marine boarding ladder& gangplank | Boarding ladder | Draft ladder | Lifesaving ladder | Vertical access ladders | Embarkation ladder | Accommodation ladder | Gangplank |
| 11 | Welding material | E 6013 | E 7018 | E 7024 | E 7018-1 | E 308L-16 | E 347L-16 | E 309L-16 |
| 12 | Metal Processing Machinery Parts | Machinery Parts or fittings can be designed as your drawings or detailed requirements, and processed by lathes, milling machines, planing machines, drills. | ||||||
