LED Solar Marine Signal Lights 24W Ship Navigation Lights IP68

Installation and use method:
● Lamps must be installed in a place where sunlight can be fully received to ensure that it can work continuously.
● Install the lamp on the horizontal mounting surface, the mounting surface should be flat and have sufficient mechanical strength, fixed with 4 M10 screws.
● Turn on the battery switch at the bottom of the lamp when it is used for the first time and turn it off when it is stored for a long time.
● Set the required working mode, open the lamp shade, according to the instructions to adjust the required lamp quality mode.
● The lamp has light control function, when the ambient illumination is lower than the light control switch value when the lamp starts to work.
● As the lamp with photoelectric switch function, when the ambient illumination is high, the navigation light will not be lit. During the test, the aerial lamp should be placed in a dark environment.
● GPS synchronization function test in an outdoor environment without shelter, synchronization takes about 10 minutes. (Only suitable for sync type with GPS). Matters needing attention
● Internal storage battery, please replace the battery regularly to ensure that the lamp can work normally, it is recommended to replace once a year.
● When stored for more than 6 months, the product should be exposed to sunlight for 3 days to fully charge the battery.
● The top bird tip is sharp, beware of being pricked.