Active Member
|
[China]
Address: Xinke International Building Liangjiang New Area,Chongqing .China
Contact name:Judy Chen
Juvi Marine Machinery Co.,LTD |
|
|
Ship Marine Boat Dock Port Salvage Launching Rubber Airbag 12M
Specification
| Airbag Layer and Pressure: | ||||||
| D=0.8m | D=1.0m | D=1.2m | D=1.5m | D=1.8m | D=2.0m | |
| 3 layers | 0.13MPA | 0.10MPA | 0.09MPA | 0.07MPA | 0.06MPA | 0.05MPA |
| 4 layers | 0.17MPA | 0.13MPA | 0.11MPA | 0.09MPA | 0.08MPA | 0.07MPA |
| 5 layers | 0.21MPA | 0.17MPA | 0.14MPA | 0.11MPA | 0.09MPA | 0.08MPA |
| 6 layers | 0.25MPA | 0.20MPA | 0.17MPA | 0.13MPA | 0.11MPA | 0.10MPA |
| 7 layers | 0.29MPA | 0.23MPA | 0.20MPA | 0.15MPA | 0.13MPA | 0.12MPA |
| 8 layers | 0.33MPA | 0.26MPA | 0.23MPA | 0.17MPA | 0.15MPA | 0.14MPA |
Marine airbag
The airbag for heavy lifting and launching and launching of ships is an innovative product with my country's independent intellectual property rights. It is widely used in ship launching and launching, caisson lifting and transporting, handling of other heavy objects, and floating aid in underwater installation projects. field.
The application of marine airbags is less restricted by space and does not require large-scale machinery and equipment, so it can shorten the engineering cycle and save a lot of money. After more than 20 years of development and practice, it has been proved that this product has the characteristics of safety, efficiency, green environmental protection, mobility and flexibility.
Airbag storage
When the airbag is not used for a long time, it should be washed and dried, filled with talcum powder on the outside, and placed in a dry, cool and ventilated place indoors. The airbag should be stretched out and placed flat, not stacked, and no heavy objects should be stacked on the airbag.
The place where the air bag is stored should be far away from heat sources.
The airbag should not be in contact with acids, alkalis, grease and organic solvents.
Airbag packaging and transportation
According to the People’s Republic of China Shipping Industry Standard CB/T 3795-1996, the packaging, transportation and storage of marine airbags should follow the following standards:
1, packaging
After folding, it is bundled and packed with a plastic woven bag.
2, transportation
When the airbag is transported in a short distance, it should be hoisted, lifted, and rolled in an inflated state. Towing on the ground is strictly prohibited.
Airbags should be folded and fixed on a pallet during long-distance transportation, with cushions underneath and wrapping with stretch film on the outside.
Fender
The fender, also known as the ship's handguard, is an elastic buffer device used on the pier or the edge of the ship, which is made of wood or rubber.
It is mainly used to slow down the impact force between the ship and the dock or the ship in the process of docking or mooring, and reduce or eliminate the damage to the ship and the dock.
