Black Paint Surface Anchor Chain 30mm 40mm Marine Boat Accessory

Marine Boat Accessory Ship Veseel Boat CCS BV LR Stud Link Anchor Chain

Specification of Stud Link Anchor Chain

Features of Stud Link Anchor Chain

Types of anchor chain

According to the chain structure:

Stud Chain and Studless Chain.

When the diameter of the anchor chain equipped as required does not exceed 17mm, it can be replaced by a studless anchor chain with the same test load, or a steel wire or fiber rope with the same breaking load.

According to manufacturing method:

Cast steel anchor chain, electric welded anchor chain and forged anchor chain.

Electric welded anchor chains have been most widely used on merchant ships.

Almost all anchor chains are manufactured by flash welding, and cast anchor chains are rarely used.

Except that most of the anchor chain accessories are forged parts, forged anchor chains have basically been eliminated.

According to the purpose:

Ship anchor chain and marine mooring chain

Grade of anchor chain

Stud link anchor chain: AM1=Grade U1, AM2=Grade U1, AM3=Grade U3

Studless anchor chain: BM1=Grade U1, BM2=Grade U1, BM3=Grade U3

New grades (mooring chain): R3, RQ3, R4, R4+, R5

The composition of the anchor chain

D Type End Shackle, ES

Open End Link, E

Enlarged Link, EL

Swivel, SW

Common Link, C

Detachable Joining Shackle/Detachable Joining Link

27.5m/Length or 25m/Shackle

Anchor end link: the first link of the anchor chain, the front end of the anchor chain, and the anchor chain whose ES is directly connected to the anchor shackle of the first anchor. According to national regulations, the first section should have a swivel.

New type of connection accessory: Swivel Shackle (SW.S). One is Type A, which is directly installed on the anchor to replace the anchor shackle. The other is type B, which is installed at the end of the anchor chain instead of the end shackle and connected with the anchor shackle. After setting the swivel shackle, the anchor end chain link may not be provided with the swivel and end shackle.

End link: the last link of the anchor chain, connected with the anchor abandoned device. Under normal circumstances, the end link is not equipped with a swivel ring, and the end link is connected to the anchor abandoned device. The matching form is shown in the figure. In order to be able to swap the ends of the anchor chain in a planned way, the chain link configuration form basically the same as that of the anchor end link can also be adopted, with a swivel but no end shackle. At this time, the ring bolt of the swivel should also face The middle link.

Intermediate link: The anchor link between the anchor end link and the end link. If the intermediate links are connected by connecting links, all the links are ordinary links.

my country stipulates that Kent shackles are used to connect the knots of a geared anchor chain, and the knots of a studless anchor chain are connected to the knots.

The enlarged link of the studless anchor chain is a studless ring that is one gear larger than the ordinary chain link.