Active Member
|
[China]
Address: Floor 4th. Building 2, No. 2 of North 3 Road Tingshan Plaza, Houjie Town, Dongguan City, 523962, Guangdong Province, China
Contact name:Marco Yang
Dongguan Cableforce Electronics Co., Ltd |
|
|
Connector Technical Data | |||||||||
Model Number | MC03P1LSABF-22W02 | ||||||||
Connectors No. | 3 Pin | ||||||||
Rated Current | 4A | ||||||||
Rated Voltage | 250V | ||||||||
Impulse Voltage | 2500V | ||||||||
| O ring | FKM, Silicon | ||||||||
| Insulation resistance | 100MΩ | ||||||||
| Contact resistence | 5MΩ | ||||||||
| Termination | Soldering | ||||||||
| Screw nut | Brass, CNC, Nickel plated | ||||||||
Protection degree | IP67, IP68 | ||||||||
• Maximum strain relief through clamping range
• IP68 achieved without seal rings (PG and metric only)¹
• Trapezoidal thread with high torque guarantees tight and permanent fit of the dome nut
• Gas tight and watertight Applications: Machines and devices
FAQ
● What is the difference between the PG-7 and PG-9 cables?
The PG-7 size is good for cables 0.118" to 0.169" diameter and this
one, the PG-9 size, which is good for 0.158" - 0.252" diameter.
These two are the most common sizes for power & data cables, be
sure to measure them so you have the proper fit.
