|
[China]
Trade Verify
Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China
Contact name:Jacky
Guangzhou Ruihe New Material Technology Co., Ltd |
|
Verified Suppliers
|
|
|
RTV2 Liquid Platinum Silicone Rubber for Smooth Pouring on Mold
Making
Rui-He 5150 Series is Low viscosity Silicone Rubber are suitable
for a wide variety of application areas – in the mold making
products including ice cream mould, fondant mold ,ice mold,silicone
cracker molds, Pathmate stone mold,cornices, balustrades,
fountains,decorative garden articles,decorative stone molds,gypsum
sculpture.
Suitable for producing high transparent & high precision
silicone rubber mold.
| Appearance | Viscosity Pa.s | Hardness | Tear Strength KN/m | Rebound % | Tensile strength Mpa | Linear shrinkage % | |
| RH5150-10ST | Translucent | 7000 | 10 | 12 | 40 | 4.5 | 1.7 |
Product should be stored at or below 30°C (86°F) in original, unopened containers. Use it within 12 months from the day of manufacture.
1) Environmental protection/non-toxicity, FDA food grade silicone
2) High viscosity, not easy to penetrate
3) Can set color (multi-layer color), do not fall off when set
color, pattern is not single, can form different patterns, silicone
printing trend leads the fashion field.
4) Various effects can be printed (bright or matte, round or
right-angled effect, thick or thin, large or small patterns),
strong stereoscopic effect, soft handle and strong adhesion.
5) High wear resistance, brightness and wash-ability
6) Can firmly adhere to the surface of textiles, non-woven fabrics,
dermis, imitation leather and other materials.
7) The effect of wool pressing is good.
8) Solve the problem of firmness of leather and waterproof fabric
effectively
9) Printing gloves, clothing, paper, sports goods, etc., cold and
heat resistance, skid resistance, silk-printed patterns have a
strong three-dimensional feel, and feel soft, and complement each
other with textiles or leather goods; silk-printed patterns also
have excellent peeling strength, wear resistance, brightness; it
also has water-proof, skid-proof, breathable, high resistance, low
temperature. And good leveling.
10) Super elasticity, in the normal range of elasticity of the
fabric does not fall off, cracking. Printing patterns do not
decolor, do not re-dye (not sublimate).
11) Good air permeability, outside water, oil and other pollutants
can not enter, while the inside of the hot air can be permeable.
1. What's silicone products you are making?
--liquid silicone rubber, silicone rubber, silicone oil; Platinum agent: -- According to different silicone molds, our silicone has different viscosity, and cause different hardness, density to meet the requests from client.
2. Do you offer free sample to client?
--Yes, we can provide the sample for test.
3. How about the quality control in your factory?
--We have professional QC team. --Each batch of silicone rubber must be tested by our safe quality examination system.
4. How to remove the bubbles during my mould making?
--After mixing liquid silicone with curing agent, please put the material into vacuum machine to take off the bubbles.
5. How to get good silicone mould to use longer time?
--The best way is:
1, Please choose the right liquid silicone according to your products.
2, Don't use any silicone oil in mold making, because it can make the silicone mould become too soft to use.
3, Silicone mould can be used longer after the whole silicone mould fully cured, so it's better to wait 2 hours after mould finished.
6. Why silicone rubber add curing agent after mixing a lot of bubbles?
--This is normal physical phenomena. The liquid will produce a large number of bubbles in the mixing time, so, it must pass through the vacuum exhaust bubble treatment.
If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices in website because prices fluctuate for many reasons.
