|
[China]
Trade Verify
Address: Room 2614-2615,Block B,No. Longyang Time Square,Hanyang District,Wuhan,China
Contact name:Yang
HUBEI CHENGLI SPECIAL AUTOMOBILE CO,.LTD |
|
Verified Suppliers
|
|
|
60000L 30 tons 30MT LPG gas storage tanker ASME Propane Pressure Vessel 60m3 Liquid Gas Storage Tank
Volume of Tank60 CBMFilling Weight30000 kgTank Weight12750 kgThickness of Shell (mm)14 mmThickness of End plate (mm)16 mmTank Diameter (mm)2700 mmExternal Dimensions (mm) (length x width x height)10962 x 2728 x 3318 mmMaterial of Tank and Main Pressure PartsCarbon Steel Q345RFilling MediumLiquefied Petroleum Gas ( Propane)Design Pressure1.77 MPaTest Pressure2.22 MpaCorrosion Allowance1 mmMedium Density420-590 kg/ cbmMain parts of LPG TankItemSpecification/ mmQuantityDischarge PipeDN50-2"1Inflow PipeDN50-2"1OutletDN50-2"1Gas phase balance pipesDN50-2"1ManholeDN4501Drain HoleDN50-2"1
Product Description
1. Storage medium of LPG Stationary Storage Tank : LPG, cooking gas,propane gas,Liquid ammoina,Dimethyl ether,Iso-butane,Pentane and etc.
2. Available tank capacity of LPG Stationary Storage Tank : 5m³~200m³,2ton~100tons
3. Manufacturing standards of lLPG Stationary Storage Tank : GB-150, ASME VIII Division I U STAMP, CCC, ISO9001 : 2008
CLW 60m3 LPG Storage Tank
1. LPG tank is also called LPG storage tank,LPG tanker, LPG storage
tanker propane tank and propane tanker which belongs to special equipment.
2. It is mainly used for liquefied petroleum gas storage and
distribution stations, car filling stations, etc.
3. There are many production processes for CLW LPG storage tanks.
Several important processes are as follows:
A, The first is the selection of raw materials for large-scale iron
and steel enterprises;
B, The second is the overall heat treatment required for the
welding of tanks.
4. This process is to eliminate the stress of steel plates and make
the entire tank become a whole, so that the weld seam will not be
cracked. Once again, the sand blasting process used by our company
uses one or two millimetersof steel grit to spray the surface of
the tank to remove rust.
5. This way of rust removal can effectively remove rust and spray
paint and can also be used for longer.Finally, our company chooses
products of large-scale paint companies, sprays the anti-rust
primer twice, then sprays the topcoat twice.
6. The paint can ensure that thestorage tank will not lose paint
for a long time, and the maintenance is better.This is how we keep
good quality and competitive prices for global valued customers.
Technique Parameter for 600000 Liters 30tons lpg storage tank
| tem | Unit | Parameter |
| Product Name | Liquefied Gas Storage Tank | |
| Design/manufacture code | GB150,ASME is for option | |
| Overall dimensions | mm | 11166*3132*3722 |
| Tank Dimension | DN3100*16*11166(inner DIA*plate thickness*length) | |
| Fact cubage | m3 | 80 |
| Tank material | Q345R | |
| Loading weight | Kg | 40000 |
| Tank weight | kg | 17000 |
| Working pressure | Mpa | ≤1.6 |
| Testing hydraulic pressure | 2.12 | |
| Testing pressure for gas density | 1.77 | |
| Test pressure | 1.69 | |
| Air tight test pressure | 1.69 | |
| Safety valve popping pressure | 1.68 | |
| Working temperature | ºC | ≤50 |
Accessory list for 60,000l lpg storage tank
| Accessories List | |||||
| Parts No | Size | Parts Name | Model No. | Quantity | Unit |
| a | DN50 | Cut-off Valve for Drain Outlet | J41N-2.5-50 | 1 | set |
| b | DN80 | Cut-off Valve for Liquid Phase Outlet | J41N-2.5-80 | 1 | set |
| c1 | DN50 | Cut-off Valve for Gas Phase Balance Outlet | J41N-2.5-50 | 1 | set |
| c2 | DN50 | Cut-off Valve for Gas Phase Balance Outlet | J41N-2.5-50 | 1 | set |
| d | DN80 | Cut-off Valve for Liquid Inlet | J41N-2.5-80 | 1 | set |
| i | DN50 | Cut-off Valve for Air Drain Outlet | J41N-2.5-50 | 1 | set |
| h | DN80 | Cut-off Valve for Safety Valve | J41N-2.5-80 | 1 | set |
| f1 | DN25 | Cut-off Valve for Magnetic Level Gauge | J41N-2.5-25 | 1 | set |
| f2 | DN25 | Cut-off Valve for Magnetic Level Gauge | J41N-2.5-25 | 1 | set |
| e | M33*2 | Thermometer | WTQ-280 | 1 | set |
| g | M20*1.5 | Pressure Gauge | Y-100T | 1 | set |
| / | / | Magnetic Level Gauge | HG21584-95 | 1 | set |
| / | DN80 | Safety Valve | A42F-25 | 1 | set |
| M20×1.5 | Needle Valve | J24W-320-DN6 | 1 | set | |
| Total Quantity | 14 | ||||
Product Advantage
5. High quality domestic or imported safety accessories for user to choose
Product 60000Liters LPG storage tank's pictures:
Pictures of LPG gas plant with the accessories:
Production Process for LPG storage tank:
-- The welding joints, welds, tank heads and geometric positions of each pressure element are strictly inspected by X-ray;
-- non-destructive testing and magnetic particle inspection test for each Underground LPG tank;
-- Design pressure of Underground LPG tank: 1.77Mpa;
-- hydraulic testing pressure:2.21 Mpa;
-- Corrosion allowance: 1mm;
-- Optional for tank accessories and lpg gas station equipments such as safety valve,globe valve,ball valve,pressure gauge,thermometer,magnetic level guage or rochester float-ball level gauge,lpg pump and motor,lpg compressor,lpg flow meter,cylinder filling scales,strainer,glass valve and so on.
