The demolition arm is widely used, especially in the current urban
planning, many villages have been expropriated, so there are more
and more opportunities for the excavator demolition arm to be used.
The manual excavation is abandoned, the progress is slow, and it is
time-consuming and laborious. Give up Blasting, and they are all
civil houses, most of which are handshake buildings, and the risk
factor is high, so this excavator demolition arm is a wise choice.
It can achieve easy demolition, multiple functions, and high
lifting height. It is worthy of your excavator demolishing
buildings arm.
Combination proposal for excavator demolition attachments
| Weight | Model | Part Length | Total length(m) | Weight(kg) | Maximum removal height(m) |
| Total Length(mm) | 25T | 8.5 | 16 | 2800 | 16M |
| Boom(A)(mm) | 2.3 | 900 |
| Arm(b)(mm) | 5.2 | 1700 |
| Maximum Digger Radius(C)(mm) | 30T | 9.5 | 18 | 3000 | 18M |
| Maximum Digger Depth(C)(mm) | 2.3 | 1000 |
| Maximum Unloading Height(E)(mm) | 5.2 | 1950 |
| Maximum Digger Height(F)(mm) | 35T | 10.5 | 20 | 3500 | 20M |
| Bucket Volume(m³) | 2.3 | 1100
|
Material: plate Q355B (optional Q690D), hydraulic steel pipe is cold-drawn
seamless steel pipe, pin material is 40Cr, high-pressure rubber
hose is 4-layer steel wire joint venture pipe, butter hose is
single-layer rubber hose, and the bushing of the boom seat is
graphite alloy Copper sets.
Structure: 1 boom, 1 middle arm, 1 small arm, 8 pin shafts, 12 stop valves, 1
bucket oil cylinder (20t level), all high-pressure hoses, and 1 set
of linkage devices.
Product advantages: The large and medium-sized booms designed by our company are
reasonable in size. After dismantling the arm and installing the
breaker, it can rotate normally. The large and medium-sized arms
can achieve a 180-degree opening angle, and the overall disassembly
height will be higher. The overall production technology is ahead
of the industry average, and the product quality is better than
products of the same level.
Advantages of long reach demolition for excavator
1. Suitable for all types of excavators.
2. Many different materials such as Q345B, and Q690D are optional
to suit your application.
3. The large boom can be two connected PCS, making it fit into one
container to save shipping costs.
4. All joints should be tapered 45 degrees before welding.
5. All parts are guaranteed
6. Some parts may be reinforced with a thicker plate or overlapped
with another plate for heavy-duty applications.
7. Boom cylinder, boom cylinder can also be provided according to
customer needs.
8. Additional pipes can be added to accommodate some additional
applications.
9. The conventional material is Q355B. Thin plate, high strength,
lightweight, reduces the load of the excavator.
10. The bushing inside the seat sleeve of the boom is made of
copper (built-in self-lubricating toner to prolong the life of the
long arm).
Advantages of ZHONGHE MACHINERY
Custom made:
1. Suitable for all brands of excavators.
2. The color, length and material can be made according to your
requirements.
3. Additional piping can be added to accommodate some additional
applications.
4. If the customer needs, we can also provide boom cylinder and rod
cylinder.
Strong production capacity:
We can produce 50 sets of excavator arms per month.
The annual output of various excavator booms can reach 600 sets.
Good service:
1. Online support within 24 hours.
2. Schedule a video technical support appointment.
(Our engineers focus on excavator arms and accessories for more
than 10 years)
3. The excavator arm should be two-section/three-section to make it
suitable for loading into a container to save transportation costs.
Company profile
Kaiping Zhonghe Machinery
Manufacturing Co., Ltd, is a manufacturing and trading combo that
specializes in customizing different kinds of excavator boom arms
and attachments We have more than 14000m' steel structure
standardization workshop with a large number of high precision
processing equipment as well as a strong and cohesive team. At
present, there are more than 60 experienced technical staff, 30
welding workers with over 7 years of experience, 15 senior
designers, and a high-tech R&D team.
Our annual output of various types of excavator boom arms can reach
600 sets. We supply products with high quality and moderate prices,
which sell well in more than 40 countries and areas.
We adhere to" Merit Quality, Sincerity Management, and Customer
Satisfaction", and honestly greet customers from home and abroad to
negotiate and cooperate with us.
Applications
Our product can well fit these excavator
brands: KOMATSU, HITACHI, CATERPILLAR, SUMITOMO, HYUNDAI, KOBELCO,
KATO, SANY, DAEWOO, VOLVO, etc.
Click here to contact Katherine for discounts
