|
[China]
Trade Verify
Address: Cuishanhu New District, Kaiping City, Jiangmen City, Guangdong Province, China
Contact name:Katherine
Kaiping Zhonghe Machinery Manufacturing Co., Ltd |
|
Verified Suppliers
|
|
|
Catalogue ZH excavator boom arm.pdf
Excavator skeleton bucket is also called sieve bucket and screening
bucket, which mainly used to remove and separates rocks and large
debris from soil and sand.
Bucket width and spacing size can be customized according to
customers' requirement.
* Sidewall with anti-collision block guard, reduce wearness
* Anti-wear teeth base blocks
* NM360,Hardox500,Q355B optional
* Double-layer wear-resistant base plate to reinforce
1. Standard bucket
Q355B material, standard plate thickness, and China high-quality
bucket tooth base. It is mainly applicable to light operation
occasions such as excavation of general clay and loading of sand,
soil and gravel.
2. Rock bucket:
Q355B material, NM400 optional. On the basis of the standard
bucket, reinforcing plates are added at the bottom, and the tooth
plate and side plate are thickened. It is mainly applicable to
heavy and light industrial occasions such as excavation of hard
soil and loading of soil, gravel and gravel mixed with soft sand.
3. Heavy duty rock bucket:
Q355B+Hardox500. On the basis of the reinforced bucket, the bottom
plate and side plates are thickened. It is mainly applicable to the
excavation of hard rocks, secondary hard rocks and wind fossils
mixed in the soil; Loading of hard rock and ore after blasting.
4. Skeleton excavator bucket
5. Tilt bucket for mini excavator
6. Clamshell excavator bucket
7. Grading ditching bucket
8. Excavator Ripper
9. Excavator Log Grapple
6. Hydraulic grabs for excavators
GOOD SERVICE:
1. Online support within 24 hours.
2. Appointment video technical support.
(Our engineers have focused on excavator boom and attachment over 10 years)
3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost.
WARRANTY
1 year for long reach boom, 180 days for cylinder and linkage, 90 days for bucket.
6. Hydraulic grabs for excavators
Please do not hesitate to contact us for any details, Thank you!
