Home Companies Kaiping Zhonghe Machinery Manufacturing Co., Ltd

Thickened Excavator Pile Driver

Contact Us

[China]

Trade Verify

Address: Cuishanhu New District, Kaiping City, Jiangmen City, Guangdong Province, China

Contact name:Katherine

Kaiping Zhonghe Machinery Manufacturing Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Thickened Excavator Pile Driver

Country/Region	china
City & Province	jiangmen guangdong

Product Details

Top sell item long reach Excavator Pile Driving Arm 18-Meters for kobelco480

Technical parameters of pile driving arm

model(T)	Boom Length(M)	Arm Length(M)	weight(T)	Max Pile height(m)
30-35T	9.8	4m	4	12
36-40T	10.5	4.5	5	15
40-55T	13	6	7	21
55-65T	15	7	10	24

Introduction of ZHONGHE Excavator Pile Driving Boom

The excavator pile driving arm is customized specially to drive and pull sheet piles, which is different from the excavator's standard boom arm. The pile driving boom is straight for lifting conveniently and is equipped with a short arm. Then a pile hammer bending arm can be connected with the small arm, so as to better control the pile lifting and pressing operations

ZHONGHE Excavator Pile Hammer Boom Arm advantages

1. Good quality: the lower cover plates of the boom and arm are thickened, the interior of the box adopts a two-way reinforcement plate design, and the small arm ear’s bearing position is treated with a segmented thickened plate, which improves the service life of the piling arm.

2. Supply customization service according to customer requirements.

3. Open angle of the boom and arm can achieve 160°, and the Angle of the large arm and the base can reach 88°, which is larger than the overall working range.

4. The steel pipe above the large arm is designed in sections to facilitate later maintenance

Applications of Excavator Pile Driving Boom

It can drive and pull sheet pile, steel rail pile, H steel rail
pile and H steel sheet pile, and is applicable to the construction
of foundation works such as flood control, embankment, drainage,
earthwork, retaining wall and slope surface

Warning if you buy our Pile Driving Long Reach Boom Arm for Excavator

All pins and linkage assembly use the original one, and the
high-pressure hose of the arm cylinder also uses the original one.

The required exciting force should be comprehensively determined
according to the soil layer, soil quality, water content of the
site, and the type and structure of the pile.

Peli Driving Arm Accessories
name	Unit	main material	warranty(day)
Boom	1	Q355B	360
Arm	1	Q355B	360
High-pressure hose	9	4 layers of wire ring	0
Lubrication pipe	5	1 layer wire ring	0
Shut-off valve	3	—	0

Purchasing Long Excavator Boom Process in ZHONGHE

1. Send us your excavator model and working surroundings.

2. We will give you a quotation with the professional advice of long reach arm combination RFY within two working days.

3. We will send you sumilation parameters after you confirm the step 2.

4. Conduct PIs and sign a contract.

5. A video inspection after production before shipping

6. Delivered.

What We Have

1. Material:

The sheet material is Q355B, the hydraulic steel pipes are Cold drawn seamless steel pipe, the pin material is 40Cr, the high-pressure hose is a joint venture pipe with 4 layers of wire coil, the butter pipe is a single layer hose, and the bushing into the large arm base is graphite alloy copper sleeve.

2. Configuration:

1pcs boom,1pca arm, 1pcs pin, 3~7pcs stop valves (according to the hammerhead), 1kit high-pressure pipe,1kit grease pipe, All other pins, and linkage assembly use the original one, and the high-pressure hose of the arm cylinder also use the original one. The iron pipe above the large arm is designed in sections to facilitate later maintenance.

3. Product advantages:

The lower cover plate of the large and small arm is thickened, the interior of the box adopts a two-way reinforcement plate design, and the bearing position of the minor arm ear is treated with a segmented thickened plate, which improves the overall service life of the piling arm. The opening Angle of the large and small arm can reach 160 degrees, and the Angle of the large arm and the base can reach 88 degrees, improving the overall pulling strength.

4. Product use:

Municipal engineering, Sanshui diversion engineering, subway, road and bridge, and other engineering projects.