Custom Oem Construction Machinery Digging Bucket 1 cbm Excavator Buckets for CAT320 ZX200 DX200 SY205C

 
click here to read our catalog:Zhonghe Machinery Catalog-Contact Sales Manager Aria Directly
 

Click here to check our facebook: Grapple Excavator

ZHONGHE rock bucket increases your productivity with a 10-20% higher payload without increasing suspended load. This is equal to a 15-30% reduction of steel in the bucket.

There are multiple advantages associated with this feature. Such as reduced resistance in operation, optimal material flow and distribution of stresses.

The curved cutting edge moves the weld away from the area of highest stress, increasing structural integrity while accommodating natural flex to alleviate stress points. This also allows for a thinner cutting edge, so you cut into material easier.

The opening angle can be customized as your requirement.


 

1. Standard bucket
Q355B material, standard plate thickness, and China high-quality bucket tooth base. It is mainly applicable to light operation occasions such as excavation of general clay and loading of sand, soil and gravel.
2. Rock bucket:
Q355B material, NM400 optional. On the basis of the standard bucket, reinforcing plates are added at the bottom, and the tooth plate and side plate are thickened. It is mainly applicable to heavy and light industrial occasions such as excavation of hard soil and loading of soil, gravel and gravel mixed with soft sand.
3. Heavy duty rock bucket:
Q355B+Hardox500. On the basis of the reinforced bucket, the bottom plate and side plates are thickened. It is mainly applicable to the excavation of hard rocks, secondary hard rocks and wind fossils mixed in the soil; Loading of hard rock and ore after blasting.
4. Skeleton excavator bucket
5. Tilt bucket for mini excavator
6. Clamshell excavator bucket
7. Grading ditching bucket
8. Excavator Ripper
9. Excavator Log Grapple
 

 

GOOD SERVICE:
1. Online support within 24 hours.
2. Appointment video technical support. 
   (Our engineers have focused on excavator boom and attachment over 10 years)
3. Long excavator boom shall be two/three jointed pcs to make it fittable into container to save shipping cost.
 
WARRANTY
1 year for long reach boom, 180 days for cylinder and linkage, 90 days for bucket.
 

 

1. Long reach excavator boom
2. Excavator telescopic boom
3. Demolition boom
4. Excavator rock bucket
5. Excavator tilting bucket
6. Hydraulic grabs for excavators

7. Other excavator attachments

 



 
Any interest, Please feel free to contact Aria directly!
click here to chat with Aria: Whatsapp/Wechat/tel:+86 13822325403