Philippine long boom excavator high quality excavator long
reach boom arm customized CAT320D 18Meters
The configuration of excavator long boom arm
01 Boom and arm 1set
02 Bucket1pc
03 Bucket cylinder 1pc
04 High pressure hose 4pcs
05 Linkage assembly 1set
06 Lubrication pipe 3pcs
07 Pin 6pcs
The Material of Configuration
Long Reach Boom Arm Accessories |
name | number | main material | warranty(day) |
Boom | 1 | Q355B | 360 |
Arm | 1 | Q355B | 360 |
Bucket | 1 | Q355B | 90 |
Bucket cylinder | 1 | — | 180 |
Linkage assembly | 1 | Q355B | 180 |
Pin | 6 | 40Cr | 0 |
High-pressure hose | 4 | 4 layers wire ring | 0 |
Lubrication pipe | 3 | 1 layer wire ring | 0 |
Steel tube | 6 | 20#steel | 0 |
The uses of excavator long reach front
The elongated arm excavator uses the ultra-long boom and the
ultra-long bucket rod to show its power. It can play a huge power
in the working conditions limited by the ground environment, such
as dredging, bank protection, slope and subway construction.
Picture of 18M long boom for CAT320 for your reference:
Here are some advantage of long arm excavator
- Long reach Boom-Arm is ideal for river and sea dredging on land or
barge.
- lubrication concentrate system, you can see there are 3 pieces
lubrication tube , they all concentrate here , it is easy and
convenient for the operator to refill the lubrication oil..
- our bushing at the boom base , you can see the bushing is graphite
copper sleeve material.
- Ideal for marine wall construction.
- our bushing at the boom base , you can see the bushing is graphite
copper sleeve material.
- The design is comprehensively simulated, ensures design integrity
and identifies potential stress and fatigue points.
- the bushing in the boom middle , we use steel material , if client
have special require ,we also can use copper sleave material.
- The welding on the boom end is 4 passes,and 3 layers.
1. Material: the material of the big and small arms is Shaogang
q355b, the iron pipe on the arm is national standard cold drawn
seamless pipe, the pin shaft is 40Cr, the high-pressure hose is a
joint-venture pipe with 4 layers of steel rings, the grease pipe is
a single-layer hose, and the bushing driven into the base of the
boom is graphite alloy copper sleeve.
2. Configuration: one set of big and small arms, six pin shafts,
four high-pressure hoses, three grease pipes, one set of connecting
rod assembly, one bucket cylinder and one bucket.
3. Product advantages: plasma cutting, machine milling, robot
welding, boring after welding, assembly line production operation,
and better quality assurance. It can be customized according to the
working conditions to meet the construction needs of different
users. The opening angle of the large and small arms can reach 163
degrees, and the excavation radius and height are larger.
4. Working conditions applicable to the lengthening arm: Municipal
Engineering, subway construction, river
dredging, reservoir cleaning and other water conservancy projects.