Mobile Diesel Flood Pump / Resistant To Solids / Self-Priming
Powerful and ready for use right away
Accuvon Rotary Lobe Pumps are ideal as mobile, self-priming rotary
lobe pumps on vehicle trailers when needed fast in the event of a
flood, canal work, pumping station support, waste water treatment
and for disasters. Suction and pressure hoses are installed in just
a few minutes.
Whether in case of flooding, with overloaded sewage systems,
flooded roads or extinguishing water feeding, reliable, mobile
high-quality pumps are mandatory in these emergency situations.
Accuvon high-quality mobile pumps can be mounted on a car or truck
trailer. Driven by a combustion motor, they work fully
independently.
Whether a tarp / roof bow construction with a convertible roof or
an additional power generator − nearly every request can be
realized. The motor can be equipped with a sound enclosure for use
in residential areas.
The Department of Emergency Management (DEM) has been relying on
Accuvon mobile pumps for many years. The high-quality pumps have
proven their worth in many flooded areas around the world.
The high flow rate (up to 4000 m3/h)
Unlike the widely used centrifugal pumps for flood relief purposes,
Accuvon rotary lobe pumps are resistant to solids and hardly
decrease in their performance under high pressure.
Benefits
Durable and resistant
The DEM places great importance on self-priming pumps which run
smoothly when conveying sandy sewage, solids, fibrous materials and
oil.
Benefits at a glance
easy to transport | Accuvon hand cart pumps are easy to push to the application site
where they are required. |
ready for use right away | The pumps are ready for use right away − connect the hoses and
start the motor. |
suitable for standalone pumping | Driven by a combustion motor, our DEM pumps are suitable for
standalone use in virtually any situation. |
powerful Flow rates of up to 4000 m³/h | |
high-quality control technology | The pump is very easy to operate via its control technology. The
display shows all relevant pump and motor parameters. |
constant flow rate, even in high-pressure situations | Even in high-pressure situations (e.g. due to long pumping
distances), the flow rate of Accuvon pumps remains constant. |
resistant to solids, self-priming and capable of running dry for a
short time | These capabilities make the pumps suitable for universal use. Even
mud-laden media can be conveyed without problems. |
user-friendly | The pumps are very easy to operate. |
very easy to maintain | The pump can be maintained within a few minutes at any given
location. |
Accuvon is a specialist for rotary lobe pumps. We offer 16 pump
sizes with flow rates of 1 –4,000 m³/h and a large selection of
equipment and additional parts. The large-scale geometry and short
passage enable the medium to be pumped gently.
Features of Accuvon Rotary Lobe Pumps:
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
Components of a Accuvon Rotary Lobe Pump
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover
![](http://img.everychina.com/nimg/0a/bc/db3a85c5581c7ec0b4a620203e36.jpg)