NBR Rubber Mobile Emergency Water Pumps Corrosion Resistant 4000M3/H

Ready-To-Connect Complete Mobile Pump Unit / Up To 4000 M³/H / Customized

if a very high flow rate is required, Accuvon pumps with flow rates of up to 4000 m³/h are installed on car or truck trailers. the mobile unit can also be transported to the application site by a wheeled loader or a forklift truck. the pumps can be very easily operated by means of the user-friendly control element. motor and pump activity are monitored and controlled on the basis of various parameters. all Accuvon mobile pumps can be manufactured for use in potentially explosive atmospheres

Accuvon offers ready-to-connect solutions. Accuvon pump units are supplied from a single source. Accuvon designs and produces the base frame, the pump technology, the monitoring sensor system and the control technology themselves − in line with your requirements with perfectly matched components.

Accuvon builds each pump unit completely themselves. Our design department works hand in hand with the Accuvon departments of metal construction, machining and electrical engineering and control technology. Whether mobile or stationary, with filter unit or electronic flow meter, Accuvon configures the pump unit exactly to your specification.

Accuvon control technology

Our engineers develop, program and build the control technology tailored to your specific purpose in our electrical engineering department. All monitoring devices such as temperature monitoring, electronic seal monitoring or overpressure protection are controlled and monitored by the control technology which is easy to operate.

 
Accuvon is a specialist for rotary lobe pumps. We offer 16 pump sizes with flow rates of 1 –4,000 m³/h and a large selection of equipment and additional parts. The large-scale geometry and short passage enable the medium to be pumped gently.
 
 
Features of Accuvon Rotary Lobe Pumps:
 
1.Self-priming, Valve-less, Positive Displacement Pump
2. Easy Maintenance through Front Cover
3. Controllable Flow, Ratio up to 1 : 5
4. Capacity of up to 4000 m³/h
5.Pressures of up to 25 bar
6. Dry-running Capability
7.Reversibility, same pump output for both directions
8. Gentle, Low-Pulsation Pumping
9.For Viscous, Solid, Abrasive or Shea-sensitive Mediums
10. Low Parts Replacement Costs
 
 
Components of a Accuvon Rotary Lobe Pump
 
1 Timing gear
2 Quench and control chamber
3 Casing in block design
4 Unwetted shaft
5 Axial and radial casing protection
6 Shaft seal
7 Rotors
8 Quick-release cover