|
[China]
Trade Verify
Address: No. 98, YanshaRoad, Nanpu, Luopu street, Panyu District, Guangzhou
Contact name:Demi Liu
Accuvon (Guangzhou) Pumps Co., Ltd |
|
Verified Suppliers
|
|
|
Low-Cost Spare Parts MultiCrusher For Chop Solid And Disruptive Matter
Accuvon Multicrusher
The Multicrusher is a macerating unit with a powerful intake function. It's design is based on the components of our pump series. Most of the components in the Multicrusher are identical to those in our pumps. Cutting blades are used instead of the ingenious rotors. The different circumferential speeds of the carrier shafts create an excellent cutting result. The drive and the Multicrusher are separated from one another. This means that the unit can be tailored to your specific purpose: Low rotational speeds for waste water treatment, or higher rotational speeds for more demanding macerating applications with high TS content.
Specifications:
| Model | Flow(max) | velocity of flow | Standard DN mm | Optional DN mm | Standard power | Optional power |
| HAC 50 | 10 m³/h | 4m/s | DN50 | DN 65 | 3Kw | 2.2KW |
| HAP 80 | 25 m³/h | 3m/s | DN80 | DN100 | 3Kw | 4Kw |
| HAP 100 | 40 m³/h | 3m/s | DN100 | DN125 | 3Kw | 4Kw |
| HAP 120 | 60 m³/h | 3m/s | DN100 | DN125 | 3Kw | 4Kw/5.5Kw |
| HAP 140 | 80 m³/h | 3m/s | DN125 | DN150 | 3Kw | 5.5Kw |
| HAF 125 | 100 m³/h | 3.1m/s | DN125 | DN150 | 7.5Kw | 11Kw |
| HAF 150 | 150 m³/h | 3.1m/s | DN150 | DN200 | 11Kw | |
| HAF 200 | 200 m³/h | 3.1m/s | DN200 | DN250 | 11Kw | |
| HAX 250 | 300 m³/h | 2.4m/s | DN250 | DN300 | 18.5Kw | |
| HAX 300 | 500 m³/h | 2.4m/s | DN300 | DN350 | 18.5Kw |
Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements
Options Of The Multicrusher
| Blades | To adjust to the size-reduction ratio, Blades are available widths ranging from 6-11 mm. They are made of hardened special steel as standard, and are also available in stainless steel for use in chemically aggressive media. |
| Flow-optimized housing | Flow-optimized housings are available for selection. This means maximum throughput with the smallest possible dimensions as well as low operating and investment costs. |
| ATEX | An ATEX-compliant version can be supplied for use in areas subject to explosion hazards. |
| Materials | Regularly, the components of the Multicrusher chamber are produced from gray cast iron or steel. Alternatively, they are available in stainless steel and/or cast stainless steel. The blades and axial wear plates are made of highly wear-resistant special steel and are also available in a stainless steel variant. |
| Drive variants | variety of different drive options are available . In most cases, geared motors and/or parallel shaft geared motors supply the drive power. Suitably equipped versions are available for operation in temporarily or permanently flooded conditions. Alternatively, it can be driven by a hydraulic motor. |
The Multicrusher – the advantages
The Multicrusher – operating principle
The dual-shaft grinder was designed using the principle of the Accuvon Rotary Lobe Pump.
Instead of the rotating lobes, this device has interconnecting cutting blades set on the hexagonal carrier shaft and attached with a central bolt.
The different circumferential speeds and blade configurations ensure excellent cutting results. The benefits of MIP are proven once again with the quick-release cover.
Quality inspection photos
