Reversible Stainless Twin Shaft Grinder Controllable Flow 18.5 KW

Reversible And Controllable Flow Stainless Dual-Shaft Grinder

Accuvon Multicrusher

The Multicrusher is a macerating unit with a powerful intake function. It's design is based on the components of our pump series. Most of the components in the Multicrusher are identical to those in our pumps. Cutting blades are used instead of the ingenious rotors. The different circumferential speeds of the carrier shafts create an excellent cutting result. The drive and the Multicrusher are separated from one another. This means that the unit can be tailored to your specific purpose: Low rotational speeds for waste water treatment, or higher rotational speeds for more demanding macerating applications with high TS content.

Specifications:

Note: Above flange is regular for each model, besides we also offer various flange connection according to your requirements

1. Tested medium in the table: water.

2. Speed, flow rate, electrical power and pressure will be according to different liquid properties.

3. Port size can be changed as needed.

4. ACCUVON reserves the right to change specifications without prior notification.

The Multicrusher – a flexible dual-shaft grinder

• Dual-shaft grinder
• Based on the design of the Accuvon Rotary Lobe Pump
• Individual cutting blades
• Powerful intake function
• Radial flow
• Can be used for demanding macerating tasks
• Option: with foreign body separator
• Variable cutting result depending on the blade configuration, flow speed, and rotational speed

Control technology

The Multicrusher can optionally be equipped with a Accuvon control unit. The intelligent reverse control can be used both to extend the service life of the Multicrusher as well as to counteract any blockages.

• The Multicrusher generally operates for 5 seconds in reverse upon starting – afterwards switching to the original direction of rotation.

• Reversing in the event of overload (blockages or clogging): Reversing upon reaching e.g. 70% of the motor rated capacity (value can be freely configured through the control unit)

• Error message: at the fifth reversal due to overload within e.g.10 minutes

• Counter which runs in the background to record the number of load-dependent reversals

The Multicrusher – operating principle

The dual-shaft grinder was designed using the principle of the Accuvon Rotary Lobe Pump.

Instead of the rotating lobes, this device has interconnecting cutting blades set on the hexagonal carrier shaft and attached with a central bolt.

The different circumferential speeds and blade configurations ensure excellent cutting results. The benefits of MIP are proven once again with the quick-release cover.

Quality inspection photos