|
[China]
Trade Verify
Address: Room 202, Building 5, 96 kechuang road, Lianke Innovation Center, Nancheng District, Dongguan, Guangdong, China.
Contact name:Victoria Li
Dongguan Liyi Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
DH-300 Lab Electronic Densimeter/Plastic and Rubber Test Density Meter
Introduction:
A new generation of digital display solid density meter DH - 300, is spoken by the largest group of digital display density measuring instrument, for raw materials in the field of rubber and plastic particles and density measurement application is extremely widespread, 0.001 g/cm3 precision, using water as medium, only 2 steps can show the density value.
Standards:
ASTM D792 ASTM D297 GB/T1033 GB/T2951 GB/T3850 GB/T533 HG4-1468 JIS K6268 ISO 2781 ISO 1183 etc.
Measurable items:
1. The density of various plastic products and raw materials can be determined, such as particle, PVC particle, PE particle, resin, sheet, pipe, wire, plate and other similar products;
2. The density of various rubber products and raw materials can be determined, such as particles, raw rubber, gelatin, silica gel, o-ring, sealing ring and other similar products;
3. It can be used to determine the floating body of various rubber foam, sponge, foam and density less than 1, etc.;
4. Determination of the density of various metals, alloys, glass, wood, stone and graphite;
6. The density of various viscous bodies and colloidal bodies can be determined, such as glass glue, protective glue, curing adhesive, skin care cosmetic, toothpaste and other similar products;
7. The semi-finished products and finished product density of magnetic materials, powder metallurgy, abrasive materials and precision ceramics can be measured;
8. All kinds of metal powder, rubber powder, plastic powder and cement powder can be measured.
Specifications:
| Model | DH-300 | DH-600 |
| Weighing range | 0.005g-300g | 0.005g-600g |
| Density Precision | 0.001g/cm3 | |
| Density Range | 0.001~99.999g/cm3 | |
| Testing type | Any solid form of density, rubber products, plastic products, metal products, plastic particles, film, floating body, powder, sealing ring, foaming body, viscous body, fasteners, pipe, plate, glass... | |
| Test Time | About 5 seconds | |
| Value showed | Apparent density, volume, mixture ratio, density and volume change rate | |
| Settings | Can set the density of different kinds of mixtures and the reading time of density, volume change rate | |
| Output | The RS - 232 - c standard communication interface, convenient test data output and print | |
| Correction way | A single bond automatic correction, the automatic detection function | |
| Accessories | (1), Main frame, (2) the sink, (3) measurement tables(4) tweezers, (5) thermometer, (6) weights, 7) wind dust cover, particle measurement accessories, floating body parts, power transformer | |
Advantage :
1. Direct reading any solid matter density value, volume and percentage of
2. PVC, EVA foam particles, powder, film, etc all can quickly measure
3. The operation is simple, convenient, fast
4 Automatic zero tracking, buzzer alarm, overload alarm function
5.Using water as medium, also can use other liquid medium.
6.With rs-232c communication interface, it is convenient to connect
PC and printer, and can choose to print the measurement data of
de-40 printer.
7 practical temperature compensation function.
8 with buzzer function.Use of integrated measurement accessories
9 large capacity design.Special wind dust cover configuration
Test Steps:
(1) Put samples on measuring table to measure the product weight in
the air, press ENTER to memory.
(2) Put samples into the water again to measure volume, press ENTER
to memory. density value showed.
Optional accessories: DE-40 Printer
By adopting the buoyancy method of Archimedean principle, the machine can accurately and directly show the density of sample.
