|
[China]
Trade Verify
Address: Room 202, Building 5, 96 kechuang road, Lianke Innovation Center, Nancheng District, Dongguan, Guangdong, China.
Contact name:Victoria Li
Dongguan Liyi Environmental Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Tensile Testing Machine / Garment Button Snap Pull Tensile Strength
Test Equipment
Product Description
Button Pull Test Machine to determine the holding or breaking
strength of prong-ring attached snap fasteners onto garments or
toys. Button Snap Pull Tester complies with ASTM PS79-96, ASTM F963
, etc.
What is our Garment Button Pull Tensile Testing
Machine used for?
Garment Button Pull Tensile Testing Machine, to determine the holding or breaking strength of prong-ring
attached snap fasteners onto garments or toys, also as a Push Pull
Tester applies for compression and tensile testing of small
samples(special attachments are available).
Garment Button Pull Tensile Testing Machine, Consists of an upper snap clamp, a lower fabric clamp and force
gauge mounted on a stand, a hand wheel on the bottom of snap tester
which allows fine control with convenient operation.
The snap component is gripped by the Upper Snap Clamp and the
garment is fixed to the lower Fabric Clamp. By turning the hand
wheel, The operator can apply a specific force and the holding
force or the breaking strength can be recorded. The capability of
Snap tester can be enhanced with clamps & accessories for
testing of other Snaps, Jean Buttons, Four Hole Buttons &
Garments Accessories such as Zippers, Bows, Appliqué, Toggles,
Hooks/Bars, and D-Rings, amongst others.
The detachment of a snap or other part may be classed as small
parts; whilst broken small parts may require sharp point &
sharp edge testing. As a result, additional testing equipment may
be recommended, such as: Small Parts Cylinder, Sharp Point Tester,
Sharp Edge Tester, Button Impact Tester, etc.
What are the Included Accessories of Garment Button Pull
Tensile Testing Machine?
l SANDOO Force Gauge FB-30K (300N, Resolution 2N, Accuracy +/-1%FS)
- 1 Pc
l Lower Fabric Clamp, Lever Armlocking - 1 Pc
l Upper Stud Clamp - 1 Pc
l Upper Snap Clamp -1 Pc
l Three Pronged Clamp - 1 Pc
l Two Pronged Clamp with screw - 1 Pc
l Lower Grasp Button Kit - 1 Pc
l Long Nose Vise Grip - 1 Pc
l Calibration: 15 lbs Calibration Weight- 1 Pc
l Safety Goggles - 1 Pc
l Rubber Ring - 5 Pcs
l Calibration Certificate - 1 Pc
l Operation Manual - 1 Pc
Standards:
ASTM PS79-96, ASTM F963, EN 71-1, 16 CFR 1500.51-53, M&S P115A
| snap pull tester |
| Weight 45Kg |
| Dimensions 230 x 280 x 750 mm(LxWxH) |
Product Effects
Company Information
LIYI INTERNATIONAL is a professional manufacturer of various kinds
of testing equipments over 24 years. LIYI products are widely used
in paper products, packaging, ink printing, adhesive tapes, bags,
footwear, leather products, environment, toys, baby products,
hardware, electronic products, plastic products, rubber products
and other industries, and applicable to all scientific research
units, quality inspection institutions and academic fields.
Our Services
If you face any problems in future during testing process we
promise we will give you a reply within 48 hours and solution
provide within 3 working days. We can offer operation video and
English operation manual. We can provide video-con.
1. Considerate Service Different countries plugs, manually change
the-voltage from 110V to 220V, insurance indicator.
2.Excellent After sale Service: 12 months warranty. Besides, we can
help you to repair your problem controller freely, even it's not
from our factory. What you need to do is to send us the controller.
3.Commitment:We will sign a letter of commitment while we sign the
contract, which will improve your confidence to us.
4.Good Packaging:
Simulation Animatronic Customer Triceratops are covered with air
bubble film before put them into the wooden case, which not only
has good shock absorption, impact resistance, heat sealing and also
has the advantages of nontoxic, odorless, moisture corrosion, good
transparency etc.
