|
[China]
Trade Verify
Address: Weinan High Technology Development Zone, Shaanxi ,China
Contact name:Amy
TID POWER SYSTEM CO ., LTD |
|
Verified Suppliers
|
|
|
High quanlity Epoxy Resin Fiberglass Rod For Composite Insulator
Fuse Cut Out Surge Arrester
Product:
1.Product Description of High quanlity Epoxy Resin Fiberglass Rod
For Composite Insulator Fuse Cut Out Surge Arrester:
Fiberglass rod is a long strip of material made of glass
fiber. It is usually composed of slender bundles of glass fibers or
ropes, which are bundled together to form a sturdy rod-shaped
structure. Glass fiber rods have many advantages, including high
strength, lightweight, and corrosion resistance
The products made of glass fiber rods have good corrosion
resistance and electromagnetic shielding performance, which can
provide reliable cable protection.
1. Line connectors and accessories: Glass fiber rods can be used to
manufacture connectors and accessories for power lines, such as
insulators, joints, and branching devices. They can provide
reliable electrical connections and have good heat and corrosion
resistance.
2. Power equipment maintenance and insulation reinforcement: Glass
fiber rods can be used for maintenance and insulation reinforcement
of power equipment. When the insulation of power equipment is
damaged or needs reinforcement, fiberglass rods can be used for
repairing and strengthening the insulation layer to ensure the safe
operation of the equipment. Overall, the application of glass fiber
rods in the power industry is mainly concentrated in the fields of
insulation materials, support structures, cable protection, and
equipment maintenance. Its excellent insulation performance,
mechanical strength, and corrosion resistance make it one of the
indispensable materials in the power industry.
Fiberglass rods have many advantages, including high strength,
lightweight, and corrosion resistance,
Technical Parameters of High quanlity Epoxy Resin Fiberglass Rod
For Composite Insulator Fuse Cut Out Surge Arrester:
| No. | Technical specification | Unit | value |
| 1 | Density(20℃±2℃) | g/cm3 | ≥2.2 |
| 2 | Water absorption rate (20℃±2℃,24h) | % | ≤0.05 |
| 3 | Tensile strength | Mpa | ≥1200 |
| 4 | Bending strength | Mpa | ≥960 |
| 5 | Dye penetrated test | Min | ≥15 |
| 6 | Water diffusion test (1%NaCl, 100h 12kv/1min) | mA | ≤0.1 |
| 7 | Shearing strength along laminas | Mpa | ≥50 |
| 8 | Volume resistivity (140℃,96h) | Ω.M | ≥1010 |
| 9 | DC withstand voltage (10mm) | Kv | ≥50 |
| 10 | Lighting impulsed withstand voltage (100kv,10mm) | Times | ≥5 |
| 11 | Bending strength at heating conditions | Mpa/150℃ | ≥350 |
| 12 | Torsion strength | Mpa | ≥800 |
| 13 | Stress corrosion (1mol/1HNO3,at 67%stress) | h | 96 |
3. More detail information for High quanlity Epoxy Resin
Fiberglass Rod For Composite Insulator, Fuse Cut Out ,Surge
Arrester
The following are some common defective products that should be
noted when using:
Support and Services:
We provide technical support and services for Insulator Fittings/
Fiberglass Rod/ Rubber. Our technical support team can answer any
questions you may have about these products. They can provide
advice on installation, troubleshooting, and maintenance. We also
offer a warranty on all our products. If any of our products fail
due to manufacturing defects, we will replace them free of charge.
Finally, we are always available to answer any additional questions
you may have.
Packing and Shipping:
Insulator Fittings/ Fiberglass Rod/ Rubber Packaging and Shipping:
Insulator Fittings: Packaged in cardboard boxes, wrapped in plastic
wrap and secured with tape.
Fiberglass Rod: Wrapped in plastic bubble wrap and placed in
cardboard boxes.
Rubber: Placed in cardboard boxes lined with plastic wrap.
All items will be shipped via UPS or other courier services.
