Active Member
|
[China]
Address: No.1 Special Taizhong Avenue, Gaoqiao Industrial Park, Wujiashan Economic Development Zone, Wuhan, Hubei, China
Contact name:
HCB Battery Co., Ltd |
|
|
Primary Li-MnO2 Batteries 750mAh CP223565 3.0V Manganese Dioxide Soft Cell Non Rechargeable
| Nominal Capacity | 750mAh |
| Battery discharged at continuous current 1mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
| Nominal Voltage | 3.0 V |
| Maximum Continuous Current | 200mA |
| Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ | |
| Maximum Pulse Discharge Current | 500mA |
| Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ | |
| Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
| Operating Temperature | -40℃ to +60℃ |
| Battery Dimension | See drawing on pag |
| Max Weight | 6.5g |
| Self-discharge Rate | 2% |
| Max self-discharged rate at ambient temperature 23±2℃ | |
| Shelf Life | 10 years |
| Ambient temperature 23±2℃ | |
1. Battery Characteristic
Nominal voltage up to 3.0 V
Energy density up to 450Wh/kg
-40°C to +70°C
Self discharge rate is less than
2% per year at room temperature
No passivation effect, instant
install-and-use, maintenance free
Ultra thin
Battery of variable dimensions
can be selected to fit in the customer’s design
Custom batteries and battery
packs are also available
The structure of the battery offers greater safety to meet customer’s requirement for special applications
2. Main Applications
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
Well pressure meters in high temperature, float meter, logging while drilling (LWD), measure while drilling (MWD), etc.
3.Warning
Do not charge. When this battery is charged, gas is generated inside and raises internal pressure, resulting in fire, heat generation, leakage or bursting.
Do not dispose of in fire, disassemble or heat in any way. It will damage the insulation materials and the safety vent resulting in fire, heat generation, leakage or bursting.
Insert batteries properly. Keep polarities in the correct position aligning + and - correctly for ALL batteries to avoid leakage or bursting.
Do not short-circuit. If the + and - come into contact with metal objects, short circuiting occurs resulting in heat generation or bursting. When carrying or storing batteries, avoid direct contact with metal objects such as bracelets or key chains by putting them in a separate bag.
