HCB Battery Co., Ltd |
|
Low Self Discharge Lithium Manganese Dioxide Battery With Multiple Safety Design
Nominal Capacity | 11000mAh |
Battery discharged at continuous current 10mA until voltage reaches cut-off voltage 2.0V at ambient temperature 23±2℃ | |
Nominal Voltage | 3.0 V |
Maximum Continuous Current | 2000mA |
Battery with minimum 50% rated capacity discharged at ambient temperature 23±2℃ | |
Maximum Pulse Discharge Current | 3000mA |
Battery with minimum 50% rated capacity discharged at max pulse for 3 seconds after 27seconds break. Ambient temperature 23±2℃ | |
Storage Condition | Temperature ≤ 30℃ Humidity ≤ 75%RH |
Operating Temperature | -40℃ to +85℃ |
Battery Dimension | See drawing on pag |
Max Weight | 125.0g |
Self-discharge Rate | 2% |
Max self-discharged rate at ambient temperature 23±2℃ | |
Shelf Life | 10 years |
Ambient temperature 23±2℃ |
1. Battery Characteristic
Single battery nominal voltage up to 3.0V
Specific energy density up to 264Wh/kg
We provide a wide operating temperature range, from -40℃ to +85℃
Under the condition of normal temperature, the battery self -discharge rate of no more than 2% per year
High capacity, stable performance, without passivation
Hermetic welding sealing to reduce the leakage for extending the shelf life to more than 10 years
The battery safety performance is good, high reliability, and pollution-free, environmental friendly.
2. Main Applications
RFID products, road toll transponder, IC cards, etc.
Smoke detectors, security alarms, seismometers, locking system, monitoring system, etc.
Wireless telecommunication devices
3. Manufacturing Advantages
4. Company Advantages
5. FAQS of General Safety Instructions
The battery should be kept as dryly as possible when they are in storage.
The battery should be stopped to using when the abnormal heat release or leakage occurs.
The manual should be read before the battery is used.
You need to keep battery out of the children. Please call to a physician immediately if it is swallowed by children.
They are going to be hot in very short time and it will lead the leakage of gas and toxic materials which may cause a big rupture.
The batteries can’t be short circuit. If positive and negative polarity of a battery is directly connected, this may cause a short circuit and this may lead to toxic materials or gas leakage and/or violent rupture.
The batteries can not be soldered directly. If they are directly soldered, it will cause short circuit and a gas and toxic material leakage or big rupture.