|
[China]
Trade Verify
Address: A802-G1, Building No. 3, Innovation Park, No. 449, Huanggekeng, Longgang,
Contact name:Olivia Lee
Shenzhen Baidun New Energy Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
This product is a 3500 cycle 3.2 v280ah lithium iron phosphate rechargeable battery, a genuine well-known brand battery, with original QR code, A grade, round terminals, screw holes can be punched or studs can be welded. With a square aluminum shell structure, safe explosion-proof, no leakage, high discharge rate, low resistance, high capacity, long cycle life, green and environmental protection, it can be used for various electric vehicles, household energy storage, communication energy storage and solar energy storage. network requirements. It has a wide range of applications, is easy to assemble, and can be made into 12V24V48V or even larger battery packs in series or parallel
Lifepo4 battery 3.2V 280ah General Technical Parameter
| Item | Parameter | Remark | ||
| 1 | Nominal Capacity | 280.0 Ah | (25±2) °C, Standard charge and discharge | |
| 2 | Typical Voltage | 3.2 V | ||
| 3 | AC Impedance Resistance( 1 KHz) | <0.25 mΩ | ||
| 4 | Standard charge and discharge | Charge / discharge current | 0.5 C/0.5 C | |
| Cut off voltage of charge / discharge | 3.65 V/2.5 V | |||
| 5 | Maximum charge / discharge current | Continuous charge / discharge | 1 C/1 C | According to continuous / pulse charge and discharge ammeters |
| Pulse charge / discharge (30s) | 2C/2C | |||
| 6 | Recommended scope of SOC | 10% 〜90% | N.A. | |
| 7 | Charging Temperature | 0 °C〜55 °C | According to continuous / pulse charge and discharge ammeters | |
| 8 | Discharging Temperature | -20 °C~55 °C | ||
| 9 | Storage temperature | Short term (within 1 month) | -20°C-45°C | N.A. |
| Long term (within 1 year) | 0°C 〜35°C | |||
| 10 | Storage humidity range | <90% | ||
| 11 | Self^discharge rate per month | <3%/month | Temperature: (25±2)°C, Storage scope of SOC: 30% 〜50%SOC | |
Main Performance
| No. | Item | Requirements | Measuring Procedure |
| 1 | Rate discharge performance at25°C | Discharge capacity/nominal capacity×l00% A) 0.5C(A)>100% B) 1.0C (A)>98% | After standard charge and Ih rest, discharge to 2.5V cutoff with the current of 0.5 C (A), 1.0C (A), respectively. If the discharge capacity fails to meet the technical requirements, this test is allowed to be repeated three times |
| 2 | Discharge performance at different temperature | Discharge capacity/nominal capacity×100 % A) 55°C>95% (Cutoff 2.5V) B) -20°C>70% (Cutoff 2.0V) | Measure the initial capacity and state of the battery: A) after standard charge and 5h rest at 55°C, discharge to 2.5V cutoff with the current of 0.5C(A)； B) after standard charge at 25±2°C and 24h rest at -20°C±2°C, discharge to 2.0V cutoff with the current of 0.5C(A). |
| 3 | The capacity retention and recovery at 25°C | Capacity Retention ≥ nomi nal capacity×95 % Capacity Recovery ≥ nomi nal capacity×97 % | Measure the initial capacity and state of the battery, after standard charge and stored for 28 days, discharge to 2.5V cutoff with the current of 0.5C (A), calculate the remaining capacity the retention can be expressed as a percentage of nominal capacity. After standard charged and 30mins rest, calculate the discharging capacity (Ah), the recovery can be expressed as a percentage of nominal capacity. The recovery is measured with discharge current 0.5C (A) with 2.5V cut-off at (25±2) °C. |
| 4 | cycle life at 25 °C | >35000 cycle @0.5C/0.5C | Under the 300kgf clamp, after standard charged and 30mins rest, discharge to 2.5V cutoff with the current of 0.5C(A) at (25±2) °C, and then start the next cycle, end with the capacity decreasing to 80% of the |
| initial capacity. The number of cycles is defined as the cycle life of the battery. | |||
| 5 | cycle life at 45 °C | >1800 cycle @0.5C/0.5C | Under the 300kgf clamp, after standard charged and 30mins rest, discharge to 2.5V cutoff with the current of 0.5C(A) at (45±2) °C, and then start the next cycle, end with the capacity decreasing to 80% of the initial capacity. The number of cycles is defined as the cycle life of the battery. |
Product Description
(1) We order batteries directly from the brand. Guarantee A grade,
brand new, genuine, sufficient capacity, voltage, resistance, and
data matching.
(2) There are three styles of battery terminals to choose from. They are: original terminals, punched terminals and soldered studs. Punch M6, stud M6. Generally, welding studs are easier to assemble.
(3) A battery is equipped with a bus bar and two screws as standard. [Bus size: 90*20*2mm (copper nickel plated) screw size: M6]
(4) Lithium battery modules are connected in parallel or in series
(5) Warranty period: 3years
Baidun has been cultivating new energy Lifepo4 lithium battery for
12 years!
The main products are lithium iron phosphate batteries, lithium
titanate batteries, ternary lithium batteries, lithium ion battery
cells, battery packs, portable power supplies, household energy
storage, commercial off-grid energy storage and solar system
chargers for solar energy storage systems.
The product application covers the three major fields of "power,
consumption and energy storage". Widely used in: various electric
vehicles, photovoltaic energy storage, household energy storage,
signal system, emergency lighting system, communication equipment,
solar energy and wind energy storage system, backup power supply
for fire fighting equipment, UPS (uninterruptible power supply),
portable digital products, etc. industry.
Baidun has always adhered to the business philosophy of high
safety, high quality and environmental protection as its core
values. Provide customers with the best overall power solutions,
OEM/ODM services and comprehensive after-sales support to meet the
different needs of customers! Integrity and professionalism, this
is also our responsibility!
FAQ
Q1: How do we place an order?
A: You can chat online with our sales or send e-mail, specify the
item, quantity, payment or other specifications below the order.
Q2: What certifications can your battery meet?
A: Our batteries have these certificates: CE, FC, MSDS, ROHS, UN.
Q3: How to calculate the shipping cost?
A: Please contact us before placing an order. We will calculate the
specific shipping cost according to different countries, different
postal codes and different order weights. We will provide you with
the best shipping method and accurate shipping.
Q4: What are the acceptable delivery terms?
A: There are many delivery terms we can accept, but currently the
most commonly used are FOB, CIF, EXW, DEQ, DDP, DDU, express
Q5: Can I get free samples?
A: Usually we do not provide free samples, but we can refund the
sample cost when the buyer places a large order.
Q6: The delivery time set by your system is 15 days. Do I really need
to wait that long?
A: No, if it is not a customized order, we usually send it out
within 7 working days.
Q7: Does the shipping method to our country include tax?
A: It depends on the country and shipping method you choose. Most
Asian countries, most European countries, the United States and
Canada have tax-included shipping channels.
We provide one-stop battery power solutions, including cell selection, battery pack assembly, style design, OEM/ODM services and comprehensive after-sales support.
Customer first
24-hour online service to solve any order problems for you!
