|
[China]
Trade Verify
Address: Room1148-1422,Dujuan Road,Yuelu area,Changsha,Hunan,China
Contact name:Leo Zeng
Deligreen Power Co.,ltd |
|
Verified Suppliers
|
|
|
This is an equalizer, it could balance the voltage difference between battery series to make the batteries more durable, and the battery life would be longer,
It's not BMS, so it does not have the over-voltage, over-current and over discharge protection, but it can work with BMS together,
It's suitable for Li-ion and LiFePo4 batteries, could be used with any capacity of batteries,
Due to the balance current is fixed, so the balance time for large capacity of battery is slow, and for small capacity battery is fast
Suitable battery types:Li ion/LiFePO4/LTO
Single cell voltage range: Li ion / LiFePO4 version:2.7-4.2V
LTO version:1.8-4.2V
Voltage equilization accuracy: 5mV(Typical value)
Equalization method: The patented balance architecture fit capacitor mode, the entire battery group at the same time to participate in the active balance of energy transfer
Balancing current: Voltage difference is 0.08V, balance current is 1A, the voltage difference is directly proportional to the balance current, the maximum allowable working current is 6.0A
Sleep voltage for undervoltage protection: Li ion / LiFePO4: below2.7V
LTO:below1.8V
Working temperature: -10°～60°
Whether an external power supply is required: No external power supply is needed, and the whole group is balanced by internal energy transfer of the battery
Technical parameters
Operating voltage 1.8V-4.5V, suitable for li-ion, LiFePo4, lithium
titanate.
Working principle: the balanced work will be started when the
balanced board is connected to the battery. The original ultra-low
internal resistance MOS and 2OZ copper thick PCB are adopted, And
the balanced current is 0-5.5a, the more balanced battery, the
smaller balanced current.
The static current is around 12 mA. It is recommended that the
battery capacity should be in the range of 60-300AH!
With undervoltage dormancy protection, if the voltage is less than
1.8V, it will automatically stop into the dormancy state, standby
power consumption is less than 0.1 mA.
Connection definition:
BC- Connect the first string of positive pole of the battery pack
BC2 Connect the second string of positive pole of the battery pack
BC3 Connect the 3rd string of positive pole of
the battery pack.
BC4 Connect the 4th string of positive pole of
the battery pack.
BC5 Connect the 5th string of positive pole of
the battery pack.
BC6 Connect the 6th string of positive pole of
the battery pack.
BC7 Connect the 7th string of positive pole of
the battery pack.
BC8 Connect the 8th string of positive pole of
the battery pack.
BC8 Connect the 8th string of positive pole of
the battery pack.
BC9 Connect the 9th string of positive pole of
the battery pack.
BC10 Connect the 10th string of positive pole of
the battery pack.
BC12 Connect the 12th string of positive pole of
the battery pack.
BC13 Connect the 13th string of positive pole of
the battery pack.
BC14 Connect the 14th string of positive pole of
the battery pack.
BC15 Connect the 15th string of positive pole of
the battery pack.
BC16 Connect the 16th string of positive pole of
the battery pack.
the total positive pole of the battery pack
Li-ion/Lifepo4 /Lipo version
Balance start voltage: 3.0V-4.2V
Balance termination voltage: 2.9V (into undervoltage sleep state)
Maximum Balance current: The whole group error is 0.1V1A; 0.5V3.5A;
1.0V5.5A (18awg 30CM cable test)
3S quiescent current Full state: (4.2v*3cell) 12.6V 12mA
4S quiescent current Full state: (4.2v*4cell) 16.5V 15mA
7S quiescent current Full power state: (4.2v*7cell) 29.4V 15mA
8S quiescent current Full power state: (4.2v*7cell) 33.6V 14mA
Whether external power supply is required: no external power supply
is required, and the internal energy transfer of the battery is
used to transfer and the entire set batteries pack in balance .
Working environment temperature: 0-60 degrees
LTO version
Balance start voltage: 2.0V-2.8V
Balance termination voltage: 1.9V (into undervoltage sleep state)
Maximum Balance current: The whole group error is 0.1V1A; 0.5V3.5A;
1.0V5.5A (18awg 30CM cable test)
5S LTO quiescent current Full state: 2.8v*5cell) 14V 12mA
6S LTO quiescent current Full state: 2.8v*6cell) 16.8V 15mA
Whether external power supply is required: no external power supply
is required, and the internal energy transfer of the battery is
used to transfer and the entire set batteries pack in balance .
Working environment temperature: 0-60 degrees
