ABB DCS500 SDCS-PIN2 Control Board BRAND-NEW Certified Products

ABB

 DCS500

SDCS-PIN2

 Control Board

The DCS series DC motor controller is a product of ABB company. The software used in the controller is developed by ABB company, specifically
Use software with versions S21.0 * *, S21.1 * *, S21.2 * *, S21.3 * *, etc. Depending on the software, use it together
Different control panels (i.e. operators), such as CDP310, CDP311, CDP312, etc. The DCS500 control we use
The device is equipped with a CDP312 control panel. CDP310, CDP311 are connected to the controller through a CDI-300 communication cable for communication
The method is RS-485, and CDP312 is connected to the controller through a MODBUS communication line. The communication method is
MODBUS. The CDP312 control panel allows for live plugging and unplugging of communication cables.
1, Hardware Configuration of DCS Series DC Motor Controller
A) The controller controls the power terminal block X99, which has two terminals X99.1 and X99.2. The power supply voltage is AC220V, and the power
The rate is 750VA.
B) Controller cooling fan power terminal block X2, with a total of 5 terminals X2.1- X2.5900A and below controllers
Using single-phase power supply, X2.1. X2.2 is internally connected to TK for temperature measurement, and X2.3. X2.4. X2.5 is respectively
L. N, PE, controllers above 900A use three-phase power supply, with a total of 9 terminals, of which X2.1. X2.2 is internally connected
TK temperature measurement, X2.3 to X2.9 are U1, V1, W1, U2, V2, W2. PE, respectively.
C) The signal terminal block X96 is usually used to control the closing of the main contactor, with a total of 2 terminals and an internal 3A relay
Normally open contacts for electrical appliances.
D) The excitation terminal block X1 has a total of 7 terminals X1.1 to X1.7, among which
X1.1 is the AC power input A-phase (IAC)
X1.7 is the AC power input B-phase (7AC)
X1.5 is the positive pole of DC excitation output (5F+)
X1.3 is the negative pole of the DC excitation output (3F -)
The remaining terminals are empty terminals
E) The main power supply terminal has a total of 5 terminals, among which UI, V1, and WI are AC input power supplies,
C1 is the positive terminal of the DC armature output,
D1 is the negative terminal of the DC armature output

Terms:

We ships worldwide and accepts T/T and Paypal.

All items are subject to availability and passing our QA testing and

inspection.

Turnaround Time:

Standard order processing is 1-2 business days plus shipping method chosen.

Rush and off-hours service available for an additional fee.

Packaging and Handling:

Items are safely packaged in custom shipping cartons for protection.

Shipping:

We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.

Call to use a shipping service other than the ones listed.

International Customers are responsible for all Customs fees, VAT and other

fees applied by their respective countries.

All shipments are fully insured.Terms:

We ships worldwide and accepts T/T and Paypal.

All items are subject to availability and passing our QA testing and

inspection.

Turnaround 

Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038

Tag:electric servo drive,

ac servo drive,

ac servo pack