|
[China]
Trade Verify
Address: Room 1012, Tantai Lake Building (Wuluo Science and Technology Park), No. 9 Taihu East Road, Wuzhong District, Suzhou City
Contact name:Della Cheng
LINCHR NEW ENERGY |
|
Verified Suppliers
|
|
|
Commercial Charging Station 360kW 685A 380V Standup 8m Gun Line Length
Application: Public operations such as parking lots, charging station, highway rest stops, petrol stations, airport, etc.. private operations such as EV dealers, EV fleets etc.
Compatible vehicles: BMW, Volkswagen, Porsche, Audi, Nissan, Mitsubishi, Peugeot, Citroen, Kia, Renault, Fiat, Tesla, Smart, Mercedes BYD, Mazda, HONDA, Skoda, etc.
1.Descriptions
The 360KW double-gun charging pile is widely used in commercial charging piles, mainly for fast charging of electric vehicles, and the output power of single gun can reach 180kW. The product is installed outdoors, with waterproof and dust-proof design and protection grade of IP54. DC electric vehicle charger integrates AC power distribution unit, lightning protection unit, charger unit, monitoring unit, bottom data acquisition unit and metering unit. DC electric vehicle charger adopts modular design, with cable length of 8 meters. It is easy to install and debug, easy to operate and maintain, and is an ideal choice for commercial charging stations.
2.Specifications
| Product name | Commercial Charging Station |
| Rated Power | 360kW |
| Input voltage | AC323V～AC437V |
| Input current | ≤685A |
| Power factor | ≥0.99 |
| Harmonic current | ≤3% |
| Output current | single 250A,double 500A |
| Basic characteristics | |
| BMS | 12V/24V compatible |
| Work efficiency | 96% |
| Startup mode | SWIPING,SCAN,VIN |
| Interaction mode | 7-inch LCD touch screen |
| Communication interface | Ethernet,4G-LTE |
| Gun thread | 8m |
| Charging interface | 2 |
| Ambient Temperature | -30℃～+50℃ |
| Relative humidity | 5%～95% (No dewing) |
| Altitude | ≤2000m |
| Site(W*D*H) | 1200mm*910mm*1800mm |
| Protection levels | IP54 |
| Weight | 760KG |
| Perform standard | GB/T-18487.1-2015,GB/T-20234.3-2015 GB/T-27930-2015,JJG1149-2018 |
3.Functions
A. The charger is designed with cross-shaped louvers to improve product reliability;
B. The air inlet of the charger adopts a 50pp dense/20mm thick dust screen to improve product reliability and ease of maintenance;
C. The DC output contactor is equipped with auxiliary contacts. The charger can detect the status of the DC contactor in real time without opening the module. The self-test time is short and the startup speed is fast. After the charger is started, it needs to continuously detect the status of the contactor and stop the machine.
