|
[China]
Trade Verify
Contact name:Zhou
Shenzhen Guihang Electronic Co., Ltd. |
|
Verified Suppliers
|
|
|
LiFePO4 Lithium Ion Forklift Battery Light Weight For Pallet Stacker / AGV
Features
| Item | Specification | Remark | ||
| Rated capacity | 200Ah | 0.2C rate discharge capacity | ||
| Minimum capacity | 200Ah | |||
| Internal impedance | ≤3.2mΩ | |||
| Nominal voltage | 12V | |||
| Cell weight | 22kg±150g | |||
Standard discharge conditions | Constant current | 100A | ||
| End-of-discharge voltage | 11.2V | |||
| Standard charge method | Constant current | 50A | ||
| Charge voltage | 14.2V | |||
| Fast charge method | Constant current | 200A | ||
| Charge voltage | 14.2V | |||
| Max continuous discharge current | 600A | |||
| Cycle life | 2000 cycles | 80% DOD | ||
| Operating temperature | Charging ambient temperature | 0~65°C | ||
Discharging ambient temperature | -20~65°C | |||
| Storage temperature | -20~65°C | |||
| Appearance | Without break, distortion, contamination, leakage. | |||
Item Description Dimensions
L Length 244mm
W Width 142mm
H Height 485mm
Basic Performance
(1) Output with high efficiency: Standard discharge current is 0.3C-0.8C, instant impulse discharge current is 10C for 10 seconds.
(2) Good performance under high temperature, it could work under 65°C temperature.The battery structure is safe and good.
(3) Good performance under low temperature.discharge capacity decreases to over 78% under 0°C and discharge capacity decreases to over 70% under -20°C.
(4) Good safety performance:When the pressure inside the battery is too large, the one-way safety valve will release gas and heat to make sure battery perform well. When the internal pressure reaches a certain level, the valve will be open immediately which can protect the battery from burning and explosion.
(5) Good cycle life time, the discharge capacity is still over 80% after 2000 cycle times of single cell(80%DOD).
(6) It can fast charging. It could be charged to 80% within 20 minutes and charged full with 2-3h.
(7) Low cost.
(8) No pollution during manufacture and usage.
Requirement for safety assurance
For the sake of safety assurance, please discuss the equipment design, its system and protection circuit of Lithium-ion cell advance. And consult about the high rate current, rapid charge and special application in the same way.
