Airport Marine Tower Solar Powered Aviation Obstruction Light Low
Intensity Num4
The aviation obstacle light is a special light for the
identification of obstacles and belongs to the category of aviation
lighting equipment industry. In order to have a difference with the
general lighting, aviation obstacle lights are not always on but
flashing, low light intensity aviation obstacle lights are always
on, medium light intensity aviation obstacle lights and high light
intensity aviation obstacle lights are flashing, the flashing
frequency is not less than 20 times/minute and not more than 60
times/minute. The function of the aviation obstacle light is to
show the outline of the structure, so that the aircraft operator
can judge the height and outline of the obstacle and play a warning
role.Specification
The vertical and horizontal distance between aerial obstruction
lights should not be greater than 45 metres (i.e. if the top of an
object is more than 45 metres above its floor, a barrier marker
light must be added to its middle)
For chimneys or other buildings of a similar nature, the top
obstruction marker light should be located between 1.5m and 3m from
the top, taking into account the light pollution from the chimney
(For chimneys or other buildings of a similar nature, the top
barrier light should be located between 1.5 and 3 metres from the
top, taking into account the contamination of the light by the
chimney).
Medium and high intensity aerial obstruction lights should be used
for extremely tall objects above 150 metres.
For high voltage transmission cables of less than 150 metres, white
medium intensity aerial obstruction lights can be set at the top of
the tower.
No matter which kind of aviation obstacle light, its in different
heights of aviation obstacle light of the number and arrangement,
should be able to see from all sides of the object or object "group
outline", and consider the obstacle mark light at the same time and
sequential flashing, in order to achieve obvious warning effect.
