|
[China]
Trade Verify
Address: ROOM 803, CHEVALIER HOUSE, 45-51 CHATHAM ROAD SOUTH, TSIM SHA TSUI, KL, HK
Contact name:Michael Yang
COMI LIGHTING LIMITED |
|
Verified Suppliers
|
|
|
B4A0158, B4A0106(RGB) 24VDC 1 * 3W Osram Small Type Recessed Underwater LED Pool Spot Lights with Mounting Sleeve
The COMI Lighting B4A-Series IP68 Small Type LED Underwater
Pool Spot Light is suitable as underwater spotlight for
fountains, pools, ponds, water gardens etc. for atmospheric or
underwater lighting. It is dimmable, automatic colour change, DMX
512, DALI, 1-10 V controllable by control units(inquire
separately), it is very easy to install by PVC plastic mounting
sleeve (included).
Important Notes:
8. Use the Silcone with good stickiness and thermal effect for reach the purpose of radiating and prevent moisture.
Material specifications:
| Housing | Molding Stainless Steel Housing 316# |
| Waterproof seal | EPDM gasket |
| Glass | Tempered glass. T=7mm |
| Lens | Optical Lens efficiency≥85% |
| Cable gland | IP-68 PG-11 copper and nickel coated |
| Gasket | Glass and housing are silicone sealed |
| LED | Single color LED, Multi RGB color power LED |
| PCB | Excellent heat conductivity aluminum, coefficient of Heat Conductivity≥2.0w/mk |
| Driver | Constant current output Single color LED=1-circuit output RGB 3in1 LED=3-circuit output |
| Application environment | Temperature of water between -20℃~40℃; Installed Less than 1 meter depth in the water. |
| Mounting Sleeve | PVC Mounting Pot |
| Power cable | H07RN-F 2X1.0mm² L=3m (for Single color) H07RN-F 4X1.0mm² L=3m(for RGB) |
Technical Specification:
| Item No. | Light source | Degree (Θ 1 / 2 ) | Input voltage (V) | Typical operating current (mA) | Typical consumption (w) | Typical luminance (lm) | IK rate |
| B4A0158 | 1×3W Single Color | 30° | 24VDC | 111 | 2.6 | Cool white=176 Warm white=140 | 06 |
| B4A0106 | 1×3W RGB 3-in-1 Color | 25° | 24VDC | R=40 G=54 B=56 | 3.5 | 58 | 06 |
Dimensional Drawing(mm):
 |  |
| Use the Silcone with good stickiness and thermal effect for reach the purpose of radiating and prevent moisture. | Water must be allowed to go inside and outside sleeve freely without leaking from the other side. |
