Phenson Lighting Tech.,Ltd |
Verified Suppliers
|
|
Outdoor Using SMD 5050 RGB 60 LEDS IP68 Waterproof Flexible LED Strip Lights / Flexible LED Strip Light
Descriptions:
1. Output voltage is 12/24DC,safe products.
2. Double layer FPCB. Flexible,high intensity and reliability.
3. Cuttable every 3LEDs as segment along the cutting marks for
12VDC LED RGB strip lights.
4. With 3M adhesive tape in the back, very simple to install at any
surfaces.
5. CE and RoHS approved.
6. 2 years warranty.
7. Matching with differents RGB controller to realize multi colours.
Parameter :
Details | Item | Unit | Specification |
Physical data | LED type | SMD | 5050SMD |
LED Qty /meter | LED/m | 60 | |
Dimensions | mm | 10*2*5000 (W*H*L) | |
Type of protection | IP | IP20 / IP65/ IP68 | |
Working temperature | °C | 0-40°C | |
Electrical data | Power | w/m | 14.4 |
Voltage | VDC | 12 (24 optional) | |
Optical data | Beam angle | degrees | 120 |
Light color | RGB | ||
Wave Length | nm | Red : 619 - 635 nm | |
Green : 510 - 530 nm | |||
Blue : 460 - 480 nm | |||
Color rendering index | CRI | 70-90 | |
Order reference | HS code | 94054090 | |
Part. no | PS5050-S60RGB-IP20-12/24 | ||
PS5050-S60RGB-IP65-12/24 | |||
PS5050-S60RGB-IP68-12/24 |
Normal packing :
A. Connector of strip to strip and connector of strip to power are
both available:
1. Cut along the mark line, tear a little bit 3M tape from the
mark. If 3M tape is not peeled off a little,
it will be not easy to insert the strip into the connector.
2. Pull the black plastic lock out from the connector, insert
strip.
3. Make sure the soldering pads fully touch the conjunction metal.
4. Push the plastic lock back towards the middle in the lock
position.
5. Do not use too much strength while pulling the plastic lock,
otherwise it can destroy the connector.
B. Notes for flexible RGB LED strip light mounting:
1. Please make sure that the back-surface of RGB LED strip light
are clean and dry. no dirt, oil, silicon oil, etc.
2. Make sure that the adhesive backing is removed completely to
guarantee perfect mounting.
3. After the SMD LED strip is well-positioned, press the strip with
an appropriate force.