Active Member
|
[China]
Address: NO.1268 Xindian Road,Jiading Industrial Zone,Jiading District,Shanghai ,China.
Contact name:
Shanghai Jibang Electronic Technology Co., Ltd. |
|
|
AC100-240V 100W/700mA Constant Current DMX Driver
Model No.; DE8239H-3CH Manual Download: DE8239H-3CH .pdf
Thank you for using high voltage DMX512 Decoder series which combined AC to DC power supply and normal DMX decoder together. It adopts the advanced micro-computer control technology, it converts the DMX-512/1990 standard digital signal adopted widely in international to the analog control signal.
It output 1~3 Channels constant current PWM signal and each channel able to achieve 256 levels of brightness controlling,and also it can be used as the connector of PC digital-light controller and analog light modulator. It is mainly used for the controlling of buildings & lights applied LED.
1), Meets DMX512/1990 Signal, Screw terminals input and output.
2), 256-levels brightness,full-color with driver controls.
3), Power no explosive flash,high frequency output,low jitter.
4), Three channels Constant Current 700mA output, Max output power is 100W.
5), Can achieve asynchronous color changes effect under working with controller.
6), Cooperating with lighting control system, can realize rich change effect.
7), With dip switch to set DMX address freely.
8), Good resistance,humane terminal design.
9), Custom-made and 3 years warranty.
Application: Architectural, commercial space, airports, construction, subway; hospitals, hotels, shopping malls, plazas, restaurants; advertising dimensional characters, logos, signs, advertising light boxes, as the use of large-area lighting.
Tech-Parameters:
| Model No. | DE8212H-3CH | Input Voltage | AC100-240V |
| Input Signal | DMX512/1990 | Output Voltage | No more than 55V |
| Output Signal | Constant Current PWM | Output Current | 700mA/CH(Customized) |
| Frequency | 5000Hz | Max Power | 100W |
| Protection Grade | IP40 | Working TEMP | -20~75℃ |
| Product Size | L301*W64*H40(mm) | Gross Weight | 500g |
Product Size:
Specifications of Constant Current and High Voltage DMX512 Decoder Series:
| Constant Current DMX512 Decoder Series | ||||||
| Model NO. | Channels | Input Voltage | Output Current | Max Output Power | DMX512/PWM Connector | Address Setting Mode |
| DE8009 | 3CH | DC12-48V | 3CH*350mA | 48W | RJ45/Press Button | Dip Switch |
| DE8010 | 3CH | DC12-48V | 3CH*700mA | 96W | RJ45/Press Button | Dip Switch |
| DE8051 | 4CH | DC12-48V | 4CH*350mA | 64W | RJ45/Press Button | Dip Switch |
| DE8052 | 4CH | DC12-48V | 4CH*700mA | 128W | RJ45/Press Button | Dip Switch |
| DE8025 | 24CH (RGB*8) | DC12-48V | 24CH*350mA 24CH*700mA | 384W 768W | RJ45/Press Button | Dip Switch |
| High Voltage Constant Current DMX Driver Series | ||||||
| Model NO. | Channels | Input Voltage | Output Current | Max Output Power | DMX512/PWM Connector | Address Setting Mode |
| DE8239H-3CH/4CH | 3CH/4CH | AC110-240V | 700mA/CH | 100W | Screw Termianl | Dip Switch |
| DE8250H-3CH/4CH | 3CH/4CH | AC110-240V | 350mA/CH | 50W | Screw Terminal | Dip Switch |
| High Voltage Constant Voltage DMX Driver Series | ||||||
| Model NO. | Channels | Input Voltage | Max Current Load | Output Voltage | Max Output Power | Address Setting Mode |
| DE8212H-3CH/4CH | 3CH/4CH | AC110-240V | 8A | DC12V | 100W | Dip Switch |
| DE8224H-3CH/4CH | 3CH/4CH | AC100-240V | 4A | DC24V | 100W | Dip Switch |
1), DMX signal input/output interface ( Three spelling a terminal ).
2), Address code set the switch interface (Using method see "DMX series address dial the meter").
3), Driver output interface (common anode drive with a 3 channels: LED + interface and CH1-CH2-CH3 output interface, can connect all kinds of full-color module and monochrome module automatically according to the lamps module load adjust the output pulse).
Note:DIP switch 1-9 bits are all pulling to the off position for each channel self-test function, LED full light again lit every channel order. Dip switch 10 is desined as a DMX signal finalizer when pull on.
Wiring Diagram:
DMX-512 Control Signal Connection:
1), DMX signal cable with twisted pair UTP (network cable), DMX signal of positive and negative terminals, crimping DMX signal cable plug is paying particular attention to polarity. The DMX512 controller input and output terminals of the common three-line, please correspond polarity connection.
2), DMX5000 output and transmission lines can't be over 300 meters.
3), DMX5000 each interface can with not more than 170 pieces of DE8239H-3CH. Eight output interface. Through the JBLED FLASH light making software and can with computer on line control. Realize infinite connect the DMX lights.
4), When contacting 32 pieces of DE8239H-3CH, DMX signal must add a signal amplifier RE2000. Cascade can be no more than 4 PCS.
5), At the end of the connection, we should connect a DMX signal finalizer ( Put down the code switch no.10 of DE8239H-3CH dial).
