Opcity III series 25W-180W 150lm/W LED Street light,LED roadway lighting with Photocell motion sensor

Overview

OpCity Ⅲ adopts the latest Lumileds LED and uses professional light distribution: Type II, Type III and Type IV. The wide heat sink helps the LED quickly heat dissipation and can ensure the life of the lamp over 50,000 hours. It is designed for the lighting of outdoor parking lots, highways, sidewalks and other areas. 25 wattage to 180wattage range 160lm/W IP66, IK08 rated, external Philips 10KV SPD. Double protection: PC Lens+Tempered Glass Convenient maintenance of driver Two mounting ways: Straight-arm mount, pole mount. 5 years warranty.

OPCITY III Series LED Street Light Specifications

• Power range: 25W to 180W
• Luminous efficiency: 150 lm/W
• Light output: 25W model - 3750 lm, 180W model - 27,000 lm
• Housing: IP65-rated die-cast aluminum
• Photocell sensor: Automatically turns on/off based on ambient light
• Motion sensor: Detects movement to increase brightness
• LED lifespan: 50,000 hours at 70% lumen maintenance
• Surge protection: 4kV standard, 10kV optional
• Voltage: AC 100-305V, 50/60Hz
• Power factor: >0.95
• Thermal management: Aluminum heat sink, internal fan (for high-wattage models)

Some usage guide:

• 25W to 60W: Residential streets, alleys, parking lots. Spacing: 30 to 50 ft
• 80W to 120W: Main roads, commercial areas. Spacing: 50 to 75 ft
• 150W to 180W: Major roads, highways. Spacing: 80 to 120 ft

Installation:

• Retrofits existing lamp posts with compatible mounting arm. Arm and hardware sold separately.
• New installation requires concrete pole foundation and compatible mounting arm.
• Follow wiring diagram to properly ground and wire the fixture. Connect to a switch or daylight sensor for automatic on/off control.

Main Features
• Ultra efficient system efficacy of up to 150lm/W
• High quality Lumileds LED chips and Meanwell /INVENTRONICS Driver
• Professionally Designed True Asymmetric Flat Optics
• Tough IP66 and IK09 construction
• Epoxy-Polyester anti-corrosion coating

Why Choose Us

1. We use Dialux software to simulate the luminous effect, so as to make sure our proposals meet clients' requirements.

2. Our PMC department follows the production and we can report to you at any time about the production by photos and videos.

3. We have IQC, IPQC, and OQC during the production, guarantee the products.

4. We have a large capacity and quickly finish the cargos in a short time with our experienced production team.