Home Companies Huizhou Jiefu Technology Co., Ltd.

Full Color Outdoor Flexible LED Display Module Size 160*320MM

Huizhou Jiefu Technology Co., Ltd.

Contact Us

[China] country

Trade Verify

Address: 10th Floor, Building 3, U Valley Zhizao Valley, Liandong, Shuikou Street, Huicheng District, Huizhou City, Guangdong Province, China 516055

Contact name:Amy Yang

Inquir Now

Huizhou Jiefu Technology Co., Ltd.

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Full Color Outdoor Flexible LED Display Module Size 160*320MM

Country/Region china
City & Province huizhou guangdong
Categories Electronics Production Machinery
InquireNow

Product Details

Refresh Rate ≥1920Hz Outdoor Flexible LED Display Module Size 160*320MM

 

 

Product Presentation

 

With the development of The Times, LED indoor soft modules have been unable to meet the current situation of people's high standards for the perfect combination of modeling and practical effects. However, the emergence of the outdoor soft module gets rid of the pain point that the traditional soft module is only installed in the indoor environment without a waterproof function. The waterproof process before and after the outdoor soft module can meet the indoor/outdoor environment conditions at the same time and has soft and bendable performance, and the waterproof advantage and high brightness display effect that the traditional indoor soft module cannot match. The module can be assembled: inner arc display surface, outer arc display surface, and corner screen display surface. It can meet different outdoor shapes and is widely used in a wide range of application fields, such as outdoor central squares, exhibition venues, high-end shopping malls, airport stations, and other public places for media release and display. Make the outdoor display more than flat;

 

 

Main process characteristics

  • Module size design 320*160mm, low current, low heat, high contrast, high refresh;
  • The bottom shell is equipped with 18 magnets, and a single magnetic content of 2500 GS, so that the bonding force between the module and the box is stronger, the magnet is anti-salt spray, and anti-corrosion test for 48 hours, and magnet height can be adjusted, effectively improve the flatness and use effect of the screen body;
  • Support front installation/maintenance design, and front and rear waterproofing process to meet the requirements of IP65 waterproofing class;
  • The module lamp surface is equipped with a protective mask to protect the lamp bead, is anti-reflective, and prevents solid dust from entering;
  • The rear cover of the bottom shell adopts a honeycomb design pattern with great visual beauty. The rear cover of the bottom shell can be disassembled for easy maintenance. It can better protect the components on the back of the module from damage and prevent the module from entering water.
  • The anti-fall safety rope is combined with the enhanced magnetic field to add a layer of safety guarantee to prevent the module from falling due to high ambient wind or high altitude installation operation;
  • PCB board adopts flexible soft board, bottom shell adopts silicone material, good flexibility performance, eliminate static electricity;

 

Outdoor soft module appearance display
 
 
 
Bending camber of outdoor soft module
 

The minimum cylindrical diameter of the inner arc and outer arc is ≥1019mm using 10 modules

Module bending arc diagram: inner arc and outer arc can be bent ≥162 °

 

 

Technical Parameters

 

Product NameP3
technical
parameters
Pixel configuration1R1G1B(full color)
Lamp bead package specificationsSMD1415
Pixel density (points /㎡)105625
Module Size (mm)320X160X12(L X H X T)
Module resolution104X52
Scanning mode13scan
Constant current IC is standardPWM
Refresh frequency (Hz)3840hz
Frame change frequency (Hz)60hz
Gray Level (bit)12bit
Assembled diameter1019mm
camber≥162°
Signal interface modeHUB75
Module bottom shell materialSilicone soft shell
Module weight (g/ sheet)610g
Flatness (mm)≤ 0.5 mm
Module protection levelIP65(Matching sealed case)
Installation/maintenance methodsPre-installation/maintenance
optical parameterBrightness (cd)5000 cd
Color temperature (K)9000-9500 K adjustable
coordinateX:0.2800 Y:0.3000 ± 0.01
Horizontal/vertical viewX:140° / Y:120°
Contrast≥3000:1
Electrical parameterModule supply voltage DC (V)5V
Module maximum current DC (A)6A
Maximum power consumption (w/ sheet)30 w
Working input voltage AC (V)220 V
Peak power consumption (w/m2)590 w
Average power consumption (w/m2)168 w
operation parameterTypical life value (h)100 000 h
Operating temperature range (℃)-20—50 ℃
Operating humidity Range (RH)20%—90%RH

 

 

 

Product hole position map

 

 

Installation Instruction

 

 

Precautions for installation details
  • When assembling modules, the operator must wear ESD gloves.
  • Do not splash water on the screen or module. For example, do not use chemical components or hard objects to clean up dust. Use an anti-static soft brush and clean water.
  • It is forbidden to tear and pull violently, and gently pull and insert the wire to avoid excessive force to pull out the copper column and damage the PCB.
  • After disassembling the back cover for maintenance, pay attention to the cover must be pressed tightly when returning to the back cover to prevent water in use.
  • It is recommended that you install the sheet metal box by spraying it. If galvanized square pipes are used, the flatness of galvanized square pipes cannot be guaranteed.
  • The bending Angle of the module ranges from 162° to 180°. Violent and repeated bending of the module is prohibited.
 
* Product failure or damage caused by failure to comply with the relevant precautions in the installation detail manual or human factors are not covered by the manufacturer's warranty. Please take good care of the documents and attachments attached to the screen. If you have any questions, please contact us.
 

 

 

Module housing accessories

 

 

 

Packing & Delivery

 

Module size(mm)carton size(mm)Number of modules (sheets)Full container weight (KG)
320X160570X370X3853019.4

 

There are 3 types of packing ways.

1. Carton box, usually for module package.
2. Wood case, for iron cabinet, sea delivery
3. Fly case, for rental cabinet, flight delivery
 

 

Hot Products

Outdoor customization P3 Flexible Led Display Screens Full Color Curved 4k Led video wall Product ...
P4 Outdoor flexible display flexible outdoor modular led screen led display flexible outdoor ...
Outdoor P4 Flexible Led Display Module 320*160mm Outside Advertising Led Display Product Introductio...
High Temperature Resistance Flexible Outdoor LED Display Module With Aluminum Shell Flexible Outdoor ...
Outdoor D1.86 Led Transparent Advertising Led Video Wall Panel Mesh Flexible Product Introduction: ...
Outdoor P4 Flexible Led Display Module 320*160mm Outside Advertising Led Display Product Introductio...