Customizable Outdoor Flexible LED Display With High Refresh And 1/10 Scan Mode

Customizable Outdoor Flexible LED Display with Refresh Rate ≥1920Hz and 1/10 Scan Mode

Main process characteristics

1. Module size design 320*160mm, low current, low heat, high contrast, high refresh;​

2. The bottom shell is equipped with 18 magnets, and a single magnetic content of 2500 GS, so that the bonding force between the module and the box is stronger, the magnet is an anti-salt spray, and anti-corrosion test for 48 hours, and the magnet height can be adjusted, effectively improve the flatness and use the effect of the screen body;

3. ​Support front installation/maintenance design, and front and rear waterproofing process to meet the requirements of IP65 waterproofing class;

4. The module lamp surface is equipped with a protective mask to protect the lamp bead, is anti-reflective, and prevents solid dust from entering;

5. The rear cover of the bottom shell adopts a honeycomb design pattern with great visual beauty. The rear cover of the bottom shell can be disassembled for easy maintenance. It can better protect the components on the back of the module from damage and prevent the module from entering water.

6. The anti-fall safety rope is combined with the enhanced magnetic field to add a layer of safety guarantee to prevent the module from falling due to high ambient wind or high altitude installation operation;

7. PCB board adopts flexible soft board, bottom shell adopts silicone material, good flexibility performance, eliminate static electricity;

​

 

 

Installation Instruction

 

 

Precautions for installation details

• When assembling modules, the operator must wear ESD gloves.

• Do not splash water on the screen or module. For example, do not use chemical components or hard objects to clean up dust. Use an anti-static soft brush and clean water.
• It is forbidden to tear and pull violently, and gently pull and insert the wire to avoid excessive force to pull out the copper column and damage the PCB.
• After disassembling the back cover for maintenance, pay attention to the cover must be pressed tightly when returning to the back cover to prevent water in use.
• It is recommended that you install the sheet metal box by spraying it. If galvanized square pipes are used, the flatness of galvanized square pipes cannot be guaranteed.
• The bending Angle of the module ranges from 162° to 180°. Violent and repeated bending of the module is prohibited.

 

* Product failure or damage caused by failure to comply with the relevant precautions in the installation detail manual or human factors are not covered by the manufacturer's warranty. Please take good care of the documents and attachments attached to the screen. If you have any questions, please contact us.

 

 

 

Module housing accessories

 

 

 

Packing & Delivery

 

Module size(mm)	carton size(mm)	Number of modules (sheets)	Full container weight (KG)
320X160	570X370X385	30	19.4

 

There are 3 types of packing ways.

1. Carton box, usually for module package.

2. Wood case, for iron cabinet, sea delivery

3. Fly case, for rental cabinet, flight delivery