Active Member
|
[China]
Address: Yudong developing zone, Yanjin County, Xinxiang City, Henan, China
Contact name:Andy
Xinxiang New Leader Machinery Manufacturing Co., Ltd |
|
|
Rail mounted transfer cart for molds is powered by lithium battery. The battery is installed in the
industrial motorized transfer vehicle and we also equip intelligent
charger for it. The industrial motorized transfer vehicle for dies, molds, coils is controlled to go forward, backward,
turn left, turn right, adjust speed through PLC and speed
controller.
Trackless transfer car usually powered by Battery, which is an
Environment-friendly product;
The freedom of the route, the unlimited travel distance, and the
saving of track laying costs;
Safe and convenient operation is available, wired connection and
wireless control, you can also assemble a PLC system for fully
automated operation;
Intelligent Charging system One charging for all day long;
Model | BWP-2T | BWP-10T | BWP-20T | BWP-30T | BWP-50T | BWP-80T | BWP-100T | |
| Rated load (T) | 2 | 10 | 20 | 30 | 50 | 80 | 100 | |
| Table size | length(L) | 2000 | 2300 | 2400 | 3500 | 5500 | 6500 | 6600 |
| Width(W) | 1500 | 2000 | 2200 | 2200 | 2600 | 2800 | 3000 | |
| Height(H) | 450 | 500 | 600 | 700 | 800 | 950 | 1200 | |
| Wheel Base (mm) | 1080 | 1650 | 2800 | 1650 | 2000 | 1950 | 2000 | |
| Axle Base (mm) | 1380 | 1850 | 1435 | 2700 | 2850 | 3500 | 4000 | |
| Wheel Diameter(mm) | Φ250 | Φ400 | Φ350 | Φ450 | Φ600 | Φ600 | Φ600 | |
| Wheel Quantity(Nos) | 4 | 4 | 4 | 4 | 4 | 4 | 8 | |
| Ground Clearance (mm) | 50 | 50 | 50 | 50 | 50 | 75 | 75 | |
| Running speed (m/min) | 0-25 | 0-25 | 0-20 | 0-20 | 0-20 | 0-20 | 0-18 | |
| Motor Power (Kw) | 2*1.2 | 2*2.2 | 2*4.5 | 2*5.5 | 2*7.5 | 30 | 40 | |
| Battery Capacity(Ah) | 250 | 250 | 400 | 450 | 500 | 800 | 1000 | |
| Battery Voltage(V) | 24 | 48 | 48 | 48 | 72 | 72 | 72 | |
| Running Time When Full Load | 2.5 | 2.8 | 2.2 | 2 | 2.5 | 2 | 1.9 | |
| Running Distance for one Charge(Km) | 3 | 3.4 | 2.7 | 2.4 | 3 | 32.4 | 2.3 | |
| Max Wheel Load (KN) | 14.4 | 42.6 | 77.7 | 110.4 | 174 | 185 | 190 | |
| Reference Weight (t) | 2.3 | 4.2 | 5.9 | 6.8 | 8 | 14.6 | 26.8 | |
Flat decks or fixtures customized for specific loads.
Custom deck configurations including built-in scales and lift/tilt/rotate capabilities.
Track or trackless, non-guided steering.Alternative drive and steering systems including gear reducer axle drives and individually-controlled drive wheels.
Fixed or variable speeds with forward/reverse function.
Drives with acceleration/deceleration capabilities.
Variety of operator control systems including fixed user interface, pendant control on coil cord, and radio-controlled remote operation.
Safety features including horns, flashing lights, e-stops, bumpers and collision avoidance systems.
Our commitment:
The load bearing safety factor of the industrial motorized transfer vehicle is no less than 120%;
Freely design the auxiliary device or foundation drawing, and offer the technical service and drawing material
16 hours engineering service and 24 hours internet service for our customers;
During the warranty period, if our products can't work normally, we can support you repair technology or replace relevant parts for you within 24 hours;
Solving the quality problem within 24 hours, serious attitude from beginning to end.Value the reputation and Preserve the image of our company.
