Active Member
|
[China]
Address: building 4, Li Jin Cheng Industrial Park,Long Hua District, Shenzhen, 518000
Contact name:Sally Way
RKENS TECHNOLOGY CO.,LTD |
|
|
PCB lead trimmer can cut leads shortest to 1.5mm. It can cut soldered pcb leads easily and fast. With spring claw feeding, The PCB board side should have at least 2MM distance from components.
Blade Type: Round
Blade Size: 200MM and 250MM OD
Power Supply:380V
To use the PCB lead trimming cutting machine, your pcb should meet below requirement.
1. The pcb size should be within 250MM width
2. The PCB board side should have at least 2MM distance from components.
3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.
| Name | PCB Soldered Components Lead Cutting Trimming Machine |
| Model | RS-911A |
| Power Supply | 380V AC50HZ/60HZ |
| Shortest cut length | 1.5MM Cut length is adjustable |
| Available PCB size | Max 400x250MM |
| Blade type | 200MM Dia, And 250MM Dia for option |
| Efficiency | 4500 RPM |
1. The eagle claw shrapnel clamp can nip PC boards tightly and push
them forward automatically and stably.
2. The track board-delivery speed can be adjusted according to pins
to increase the service life of the cutter.
3. As the principal axis rotates quickly, the machine works
accurately and efficiently.
4. The crest pinprick ball and the bakelite press plank can reduce
the error of lead-cutting of PC boards transformed during the tin
soldering.
5. With a photoelectric switch, it is very safe.
