Active Member
|
[China]
Address: building 4, Li Jin Cheng Industrial Park,Long Hua District, Shenzhen, 518000
Contact name:Sally Way
RKENS TECHNOLOGY CO.,LTD |
|
|
Automatic pcb lead cutting machine can cut the wire leads after soldering and brushing out the solder residual and lead adhered.
Feeding speed adjustable up to 3 M/minute. with warp prevention device to ensure no damage on board during trimming. PCB pallet carrier unnecessary. PCB width Up to 250mm.
To use the PCB wire lead trimmer, your pcb should meet below requirement.
1. The pcb size should be within 250MM width
2. The PCB board side should have at least 2MM distance from components.
3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.
| Name | Automatic PCB Lead Cutter Components Lead Wire Cutter Machine |
| Model | RS-911A |
| Power Supply | 380V AC50HZ/60HZ |
| Shortest cut length | 1.5MM Cut length is adjustable |
| Available PCB size | Max 400x250MM |
| Blade type | 200MM Dia, And 250MM Dia for option |
| Efficiency | 4500 RPM |
1.The machine perform efficiently on the PCBA that components inserted and soldered then brushing the boards.
2. With A pair of conveyor chain , it can clamp and deliver the PCBA to the blade turning in high speed for trimming.
3. With Warp prevention device, machine can ensure no damage on boards.
4.High volume production. This model is designed to trim the extra long leads automatically and efficiently on the PCB that components inserted and soldered.
