Active Member
|
[China]
Address: building 4, Li Jin Cheng Industrial Park,Long Hua District, Shenzhen, 518000
Contact name:Sally Way
RKENS TECHNOLOGY CO.,LTD |
|
|
The Automatic PCB lead cutter machine is mainly used for cutting the extra pins of the components
after soldering. It can Automatic input and output the PCB, cutting the PCB lead after the welding. Cut length is easily adjsutable, can cut shortest to 1.5MM.
1. The pcb size should be within 400x250MM.
2. The PCB board side should have at least 2MM distance from components.
3. The shortest length machine can cut is up to 1.5MM. However if there is components on back side, lead length should be higher than components. For example, there is 3MM height components on bottom side, so after cutting, the lead length should be higher than 3MM. You can not cut lead length lower than 3.0MM.
| Name | Automatic Components Pin PCB Lead Cutter Cutting Machine |
| Model | RS-911A |
| Power Supply | 380V AC50HZ/60HZ |
| Shortest cut length | 1.5MM Cut length is adjustable |
| Available PCB size | Max 400x250MM |
| Efficiency | 4500 RPM |
