|
[China]
Trade Verify
Address: Floor 2, Building 2, Ruijing Building, No.868, Jinshan South Road, Mudu Town, Wuzhong District, Suzhou
Contact name:Tian
Jiangsu GIS Laser Technologies Inc., |
|
Verified Suppliers
|
|
|
Computer-to-screen (CTS)
The laser direct exposure machine is an exposure system (CTS) that can image a computer image on a screen plate. The laser direct exposure machine includes a high-precision optical lens, a DMD imaging system, a 405-nanometer laser, a stable motion platform, a computer with an efficient software system, a monitor, and a stable water cooling system. This laser direct exposure machine can expose and image with high precision on the silk screen.
The laser direct exposure machine introduces digital optical processing (DLP) technology into the field of screen imaging, using DLP laser direct imaging technology to replace the traditional film or mask exposure mode, and is equipped with HIWINSP-level guide rails and linear motor Renishaw gratings. Marble base, etc., to ensure the stability of the machine.
What is automatic expanding and shrinking?
In view of the special effect of printing paper with screen, traditional films need to be edited for printing down due to deformation after printing paper, resulting in manual work waste and precision loss. CTS300-AI uses CCD industrial camera to capture paper data, calculate paper deformation data through powerful computing ability while automatically expand and shrink the graph according to the paper deformation data, so that the graph on the screen accurately aligns the deformed paper, thereby eliminating the distress of editing film.
Specification / Model | CTS300 |
Max screen size ( mm ) | 1200x1300 |
Min screen size ( mm ) | 400x400 |
Max exposure size ( mm ) | 1100x1250 |
Screen frame thickness (bespoke service is available) | 25-45mm |
Imaging System | DMD DLP Technology |
Emulsion thickness (EOM) | Solvent resistant emulsion 3μm-150μm, water resistant emulsion 3μm- 350μm |
Exposure time | 120-240s/ ㎡, #350 yellow mesh |
Resolution | 2540dpi (Optional) |
Raster | 133LPI |
Focus system | Fixed focusing |
File format | 1_bit tiff etc. |
Laser type | UV laser, wavelength 405±5nm |
Laser power | 20W/25W(Optional) |
Equipment size (mm) | 3270x1900x1600 |
Equipment net weight | 2600KG |
Conditions | Yellow light room with cleanliness Class 10000, temperature 22±2°C, 40-70% relative humidity (No condensation) |
Power | Single phase 220v, 50/60HZ, 4KW, gas 1L/min |
*Specifications subject to change without notice
CTS Advantages
High Precision:
Resolutions 1270dpi or 2540dpi, with raster 133lpi/dpi (halftones printing)
High Efficiency:
3 minutes to finish the exposure on screen size 1000mm*1000mm. Stencil making efficieny has been greatly improved due to a lot of time is saved by the accurate exposure alignment and lobor reduction.
Low Cost:
Elimination of film positives. Litho film are becoming increasingly expensive and the number of suppliers on the maket is rapidly decreasing. 1 procedure of CTS digital screen making to replace 5 procedures of from the conventional process
About US
GIS Tech Inc.has established a manufacturing and R&D base in Fengxian County, Xuzhou, covering an area of 20,000 square meters, including 1000 square meters of clean workshops. It has R&D and after-sales centers in Suzhou, covering an area of 2,000 square meters, with a core teams of 30 R&D people, and it’s planned to be expanded to 60 people. The products cover optical, mechanical, electrical systems, software and sports systems. The technical force is strongly supported by a team of experts from Japan and Germany, with a technical team covering high-end talents such as optics, mechanics, electronics, software, etc., as well as complete production facilities and related equipment.
