Home Companies Shenzhen Qihang Electronic Technology Co.,Ltd

93*70*12.5MM LCD Screen Module STN, Transmissive Display Mode

Shenzhen Qihang Electronic Technology Co.,Ltd

Contact Us

[China] country

Trade Verify

Address: Unit a, 6th floor, building 8, zone b, 5th floor industrial zone, Shangcun community, gongming street, guangming new area,

Contact name:Celia Xia

Inquir Now

Shenzhen Qihang Electronic Technology Co.,Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

93*70*12.5MM LCD Screen Module STN, Transmissive Display Mode

Country/Region china
Categories Advertising Screens
InquireNow

Product Details

93*70*12.5MM LCD Screen Module from Shenzhen Qihang Electronics with STN, Transmissive Display Mode

 

Product Description

JXL12864F04 is a dot matrix LCD module, It can display 128*64 dots size LCD panel. It
can be used in graphic display modes, and includes various attribute functions.
The device has an 8-bit parallel data bus and control lines for reading or writing through an
MPU interface.
 
 

Specification

ITEMVALUE
TYPECOG
Display Size93*70*12.5MM
Supplier Typemanufacturer
Place of OriginChina
Brand NameShenzhen Qihang Electronics
Display modePositive
LCD TypeSTN, Transmissive
View area71.9*39.9
display TypeFSTN
Viewing Angle6:00
Operating Temperature-20℃~70℃
Storage Temperature-30℃~80℃
Driver ICST7920

 

Company Profile

 

 

Application

Code-breaking LCD screens can be used in many fields, such as telephones, calculators, electronic watches, digital multimeters, and electronic game consoles. Dot-matrix LCD screens can be used in electricity, water, gas meters; telephone billing devices, instruments and meters, computer fuel dispensers, banking systems, communication equipment, attendance systems, repeaters, taxation systems, etc.

Certifications


 

Shipment

Handling Precautions

Mounting method
A panel of LCD module made by our company consists of two thin glass plates with polarizers that easily
get damaged.
And since the module in so constructed as to be fixed by utilizing fitting holes in the printed circuit board
(PCB), extreme care
should be used when handling the LCD modules.
Cautions of LCD handling and cleaning
When cleaning the display surface, use soft cloth with solvent (recommended below) and wipe lightly.
-Isopropyl alcohol
-Ethyl alcohol
-Trichlorotriflorothane
Do not wipe the display surface with dry or hard materials that will damage the polarizer surface.
Do not use the following solvent:
-Water
-Ketene
-Aromatics
Caution against static charge
The LCD module use C-MOS LSI drivers. So we recommend you:
Connect any unused input terminal to Vdd or Vss. Do not input any signals before power is turned on, and
ground your body,
work/assembly areas, assembly equipment to protect against static electricity.
Packaging
-Module employs LCD elements, and must be treated as such. Avoid intense shock and falls from a
height.
-To prevent modules from degradation, do not operate or store them exposed direct to sunshine or high
temperature/humidity.
Caution for operation
-It is an indispensable condition to drive LCD module within the limits of the specified voltage since the
higher voltage over the
limits may cause the shorter life of LCD module.
-An electrochemical reaction due to DC (direct current) causes LCD undesirable deterioration so that the
uses of DC (direct
current) drive should be avoided.
-Response time will be extremely delayed at lower temperature than the operating temperature range
and on the other hand at
higher temperature LCD module may show dark color in them. However those phenomena do not mean
malfunction or out of
order of LCD module, which will come back in the specified operating temperature.
Storage
In the case of storing for a long period of time, the following ways are recommended:
-Storage in polyethylene bag with the opening sealed so as not to enter fresh air outside in it. And with
not desiccant.

 

FAQ

Q1:How long is the warranty?

A:The warranty period is one year.During the warranty period, in case of non-human injury, we will provide free repair or replacement, including delivery costs.Beyond warranty: we provide repair parts at a lower cost and provide services free of charge.

 

Q2:Do you accept customization?

A:Yes, we are glad to provide customized services.Our factory can design and produce the appearance, logo, material, color, size,installation method and so on according to customers' requirements.

 

Q3:What are your payment terms?

A:Sample 100% TT,batch order 30% deposit, 70% balance before delivery.

 

Q4:How long is the delivery time?

A:For the finished products in stock, the delivery time is within 3-7 days;No inventory for 20-25 days;For customized samples and bulk orders, the lead time is 7-30 days.

 

Q5:How can I get a sample?

A:Since most of our products are high value products, there are no free samples.If you need to order a sample for inspection, we would like you to pay the sample fee and freight, and the sample will be sent to you upon receipt of payment.

 

Tags

1/3 Bais lcd seven segment display

HTN Segment LCD Module

1/3 BIAS negative lcd display

 

Hot Products

93*70*12.5MM LCD Screen Module from Shenzhen Qihang Electronics with STN, Transmissive Display Mode ...
FSTN Transflective LCD Screen Module with White Backlight, -20℃~70℃ Operating Temperature JXL12864F0...
Specification ITEM VALUE Supplier Type Manufacture Place of Origin China Guangdong Brand Name QiHang ...
STN Positive Display Dot Matrix LCD Module for -20℃~70℃ Operating Temperature Product Description ...
High-Quality 3V OLED LCD Module with Reflective Polarizer from Qihang Brand Manufacturer in China ...
1.DESCRIPTION Dot matrix graphic LCD is a kind of LCD can dynamically display graphic Chinese ...