Active Member
|
[China]
Address: 3F, B Block, ShenKeng Industry Park, Shenzhu Rd，Longgang, Shenzhen, CHINA
Contact name:Miller.Shek
Shenzhen Cablelinker Electronics Co., Limited |
|
|
Gimbal Flexible Flat PCB Gimbal Ribbon Cable for DJI Mavic Pro Repair Parts
Standard Flex Materials:
Feature
Replacement Flexible Flat Cable for DJI Mavic Pro repairing
Extra heavy power traces for higher performance.
Easy to replace, two sided tape included allowing placement at strategic points for easy installation
Total length:Approx. 7.5cm/2.95inch
Content
1* Mavic Pro Flexible Flat Cable Set
| Base Copper: | 1/3 oz. - .00047 in. (.012mm)--rarely used |
| 1/2 oz. - .0007 in. (.018mm) | |
| 1 oz. - .0014 in. (.036mm) | |
| 2 oz. - .0028 in. (.071mm) | |
| Solder Mask: | Polyimide Coverlay: 0.5 mil to 5 mils Kapton (.012mm - .127mm) |
| with 0.5 to 2 mil Adhesive (.012mm - .051mm) | |
| LPI and LDI Flexible Soldermasks |
Specification of FPC Manufacturing
| Material | FR4,Polyimide / Polyester |
| Counts | Flex: 1~8L; Rigid-Flex: 2~8L |
| Board Thickness | Min.0.05mm ; Max. 0.3mm |
| Copper Thickness | 1/3 oz-2 oz |
| Holes Location Tolerance | ±0.05mm |
| Coverlay Drill Size (Min) | 0.6mm |
| CNC Drill Size (Max) | 6.5mm |
| CNC Drill Size (Min) | Flex: 0.15mm |
| Min Line Width / Spacing | 0.1/0.1mm |
| Min Pad Size | φ0.2mm |
| Etch Tolerance | Finished line width tolerance ±20% |
| Hole to Coverlay Opening Windows (Min) | 0.15mm |
| Surface Finish | Plating Ni / Au ; Chemical Ni / Au ; OSP; Immersion Silver/Gold, OSP, Gold plating |
| Coverlay Registration Tolerance | ±0.15mm |
| Solder Mask Registration Tolerance | ±0.2mm |
| Min. Solder Mask Dam | 0.1mm |
| Stiffener, Adhesive, Glue paper | ±0.30mm |
