Asoe Hose Manufacturing Inc. |
|
Longman 450 is one type of through-the-weave Nitrile Rubber (NBR) covered
hoses. Longman 450 hoses shall be made from 100% high tenacity synthetic yarn
circular woven and completely, totally embedded in the NBR/PVC
compound, excellent protected against mechanical damage, forming a
single homogenous construction without the use of any glues or
adhesives of any type.
NBR compound is composed of NBR and PVC. High percentage of NBR content contributes to better abrasion-resistance.
Lining Properties:
a. Ultimate Tensile Strength:
Tensile strength of the lining and cover shall not be less than
1500 psi (10,500 kpa ).
b. Ultimate Elongation:
400% minimum.
c. Accelerated Aging Test
The tensile strength and ultimate elongation of the vulcanized
rubber compound which has been subjected to the action of oxygen at
a pressure of 300 psi +/- 10 psi , (2100kpa +/- 70kpa) and
temperature of 70 degrees centigrade +/-1 degree centigrade (158 F
+/- 18 F ) for a period of 96 hours shall be , greater than 60% of
the original properties stated.
Application:
Suitable for irrigation, washdown, water discharge, Drainage pumps, Pumping of sludge and liquid fertilizers, Temporary installations (by-passes) etc.
*Not recommended or approved for fire fighting or frac water transferring.
Recommended for Industrial Water Discharge Solution.
Comparable to
Oroflex 10 of Tipsa, Superflow of Key, etc.
Specifications:
Inner tube: Very smooth with minimum friction loss
cover: ribbed for more abrasion resistance
Reinforcement: Circular woven polyester jacket
Operating Temperature Range: -20°C up to +80°C (-4°F up to 176°F)
based on water
Standard Color: Black, other colors available per request
Standard Length: 50ft, 100ft, 300ft/91.5m, 330ft/100m, 660ft/200m;
other lengths available per request;
Elongation at WP:<1.5%
Expansion at WP:<6%
Abrasion:6000 DIN cycles
Couplings: Camlocks, Pinlug, Expansion Ring couplings etc.
Longman™450 Nitrile Rubber Layflat Hose | |||||||||
ID | Wall Thickness | Weigth | Working Pressure | Bursting Pressure | |||||
Inch | mm | Inch | mm | lbs/ft | kg/m | PSI | Bar | PSI | Bar |
1 1/2 | 38+1.5 | 0.08 | 2.2 | 0.21 | 0.32 | 150 | 10 | 450 | 30 |
2 | 51+1.5 | 0.08 | 2.2 | 0.32 | 0.47 | 150 | 10 | 450 | 30 |
2 1/2 | 64+1.5 | 0.08 | 2.2 | 0.44 | 0.65 | 150 | 10 | 450 | 30 |
3 | 76+2.0 | 0.1 | 2.5 | 0.18 | 0.72 | 150 | 10 | 450 | 30 |
4 | 103+2.0 | 0.1 | 2.5 | 0.66 | 0.98 | 150 | 10 | 450 | 30 |
6 | 154+2.5 | 0.12 | 3.2 | 1.14 | 1.7 | 150 | 10 | 450 | 30 |
8 | 204+3.0 | 0.12 | 3.2 | 1.54 | 2.3 | 150 | 10 | 450 | 30 |
10 | 254+3.0 | 0.14 | 3.6 | 2.05 | 3.05 | 150 | 10 | 450 | 30 |
12 | 305+3.0 | 0.18 | 4.5 | 2.41 | 3.6 | 150 | 10 | 450 | 30 |