|
[China]
Trade Verify
Address: No.65, Tianming Road, Jinshui District, Zhengzhou City, Henan Province, China
Contact name:Andrew
Henan Baishun Machinery Equipment Co., Ltd. |
|
Verified Suppliers
|
|
|
China manufacturer Heavy duty Horizontal Conventional Lathe machine
A:Heavy duty horizontal lathe machine Introduction:
This machine is the conventional heavy-duty horizontal lathe, it suitable for high speed steel hard alloy cutting tool, various materials shaft parts, cylindrical and disk-shaped parts processing. To achieve turning cylindrical, face grooving, cutting slot, cutting off, boring and turning inside and outside the cone and other processes. This series heavy duty lathe machine is suitable to processing shaft parts of gas turbines, rotor, roller, and other large high-precision.
B: Machine main technical data:
| Model | C61160 | C61200 | C61250 | C61315 | |
| Max.swing over bed | mm | 1600 | 2000 | 2500 | 3150 |
| Max.swing over carriage/tool post | mm | 1250 | 1600 | 2000 | 2600 |
| Width of bed (Three lathe beds) | mm | 1600 | 1600 | 1600 | 1600 |
| Max.length of workpiece | m | 5-20 | 5-20 | 5-20 | 5-20 |
| Max.weight of workpiece | ton | 32 | 32 | 32 | 32 |
| Max.torque of face plate | kg.m | 8000 | 8000 | 8000 | 8000 |
| Max.cutting capacity tool post | kg.m | 8000 | 8000 | 8000 | 8000 |
| Section dimension of tool shank | mm | 70x70 | 70x70 | 70x70 | 70x70 |
| Headstock | |||||
| Progression of spindle speed | Stepless | Stepless | Stepless | Stepless | |
| Range of spindle speed | rpm | 1~200 0.8-160 0.025-125 | 1~200 0.8-160 0.025-125 | 1~200 0.8-160 0.025-125 | 1~200 0.8-160 0.025-125 |
| Diameter of chuck | mm | 1600 | 2000 | 2500 | 3150 |
| Knife rest | |||||
| Step. No of feed | step | 18 | 18 | 18 | 18 |
| Range of longitudinal feed | mm/r | 0.125-48 | 0.125-48 | 0.125-48 | 0.125-48 |
| Range of cross feed | mm/r | 0.063-24 | 0.063-24 | 0.063-24 | 0.063-24 |
| Feed range of tool slide compound | mm/r | 0.063-24 | 0.063-24 | 0.063-24 | 0.063-24 |
| Longitudinal rapid traverse speed | mm/min | 3000 | 3000 | 3000 | 3000 |
| Cross rapid traverse speed | mm/min | 1500 | 1500 | 1500 | 1500 |
| Max.travel of cross slide | mm | 670 | 800 | 1000 | 1250 |
| Metric thread (thread pitch) | mm | 2—40 | 2—40 | 2—40 | 2—40 |
| Inch thread | mm | 1—14 | 1—14 | 1—14 | 1—14 |
| Module thread | mm | 1.5—20 | 1.5—20 | 1.5—20 | 1.5—20 |
| Tailstock | |||||
| Traversing capacity of sleeve | mm | 200 | 200 | 200 | 200 |
| Rapid traverse of tailstock | mm/min | 3000 | 3000 | 3000 | 3000 |
Rapid traverse of sleeve | mm/min | 664 | 664 | 664 | 664 |
C: Heavy duty horizontal lathe machine
This is C61250X12000MMX32T heavy duty horizontal lathe machine
This is C61200X8000MMX32T heavy duty horizontal lathe machine
This is C61315X16000MMX40T heavy duty horizontal lathe machine
D: Machine Features:
1.The machine tool main transmission for DC motor drive, the
spindle speed is stepless speed regulation. So in the processing of
different step and the work piece, it can obtain the reasonable
cutting speed.
2.Machine tool guide ways after the processing of high frequency
quenching and grinding process, it can improve the surface hardness
and precision of machine tool, also have long service life.
3.Spindle supported by two points, bearings with a precision
spindle bearings, transmission gear after high-frequency quenching
and grinding process for processing, and the tooth top edge
trimming technology
4.Turret using the pressure plate holder is divided into three
parts, by the large carriage, cross slide and the top knife block,
with high strength, high rigidity and other characteristics,
suitable for heavy cutting.
E: Machine inspection:
F: Customer visit:
G: Customer visit:
H: Contact us:
1. All kinds of agreement can be signed with your company if you
have any afraid for our products;
2. Quality is our culture ;
3. With us your money in safe, your business in safe ;
4. we think our product will give you an edge over your competitors
;
5. 7*24 hours multi-language professional after-sales service group
.
