XINLAND LASER CO.,LTD |
|
Good Selling 405nm 10mW Single Mode with PD Semiconductor Laser Diode for Laser Pointer
Laser application:
Product Specifications:
Wavelength | Part Number | Output Power | Mode Type | Laser Type | Package | PD | FAC |
405nm | XLD-405-010m-1-PD | 10mW | SM | FP | TO18 | √ | × |
XLD-405-150m-1(3.8mm) | 150mW | SM | FP | TO38 | × | × | |
XLD-405-150m-1(5.6mm) | 150mW | SM | FP | TO18 | × | × | |
XLD-405-200m-1 | 200mW | SM | FP | TO38 | × | × | |
XLD-405-250m-1 | 250mW | SM | FP | TO18 | × | × | |
XLD-405-300m-1(SM) | 300mW | SM | FP | TO18 | × | × |
Safety Instructions:
1. When the laser tube is working, it is strictly prohibited to
look directly at its end surface.
2. The laser tube needs a suitable drive power. The instantaneous
reverse current cannot exceed 25μA, and the reverse voltage cannot
exceed 2V, otherwise the laser tube will be damaged.
3. Insert the laser tube before turning on the power. The initial
output voltage of the power supply should be zero, and the current
should be increased or decreased slowly to prevent current impact
from damaging the laser tube.
4. Testing the laser tube: inserting or unplugging the laser tube
must be done after power off. Do not plug/unplug the laser tube
with power on, otherwise the laser tube will be damaged and
invalidated.